This is topic Procharger D1SC Brace in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027766
Posted by ratfast (Member # 8720) on :
 
Anyone on here built and have a picture of or purchased a brace for a Procharger in a Foxbody? I have noticed the belt starting to want to walk off the front of the crank pulley. I want to brace the blower back to the strut tower. Just bought a new belt, but have never had this problen before. Any feedback would be great, Thank you.
 
Posted by Nifty50 (Member # 9987) on :
 
This is a setup that someone that I know made. I believe that kurgan motorsports has a similar product.

-

-

-

[ December 01, 2012, 04:05 PM: Message edited by: Nifty50 ]
 
Posted by Nifty50 (Member # 9987) on :
 
also are you using the AC brackets or the Renegade brackets?
 
Posted by ratfast (Member # 8720) on :
 
Using the AC brackets.
 
Posted by Nifty50 (Member # 9987) on :
 
Fab yourself some brackets like in the pics above and get this, then you should be gtg.

-

-
 
Posted by ratfast (Member # 8720) on :
 
I can make the brackets, and I like the heim joint ends that swivel. The Kurgan brace is way too nice to be under the hood of my car and the ends looked fixed. Thank you for the ideas and leads.
 
Posted by Nifty50 (Member # 9987) on :
 
Kurgan has 2 different versions of their blower brace I believe. One is the older one and then there is the newer revised version that has adjustable ends. But anyways no problem with the help, I know there isnt too many Procharged fox members on here and thought I would help. Good luck partner [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com