This is topic best street strip single turbo? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026431
Posted by 93ex chp (Member # 9016) on :
 
Looking for a good street strip turbo that will hold up to 1,000hp and has good warranty on it..not strictly drag but will see track from time to time and weekend/daily driven..looking for t76 or bigger.thanks
 
Posted by racsirx (Member # 1710) on :
 
Precision PT8847
 
Posted by RONIN (Member # 9987) on :
 
In a street car you want make sure to keep the A/R ratio below .96 anything above and you will experience major turbo lag.
 
Posted by 5.0 LsX (Member # 10017) on :
 
what displacement motor? what trans? gears?
 
Posted by 93ex chp (Member # 9016) on :
 
Lee..that's the turbo your going with in the new set up?
 
Posted by 93ex chp (Member # 9016) on :
 
5.0 LSx...I have 302,c4,342gears
 
Posted by 5.0 LsX (Member # 10017) on :
 
i think you would be happy with a 76mm and .96ar exh
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by 93ex chp:
Lee..that's the turbo your going with in the new set up?
I might get it but I am looking into a custom turbo right now, maybe a 91mm turbo. Its a good 88mm turbo for the street and can hit 1000hp without pushing it too hard with a 302 based motor, a 76mm turbo can get you to a 1000hp also but you will have to push it hard and will need to worry about running Meth injection or an air to water intercooler to keep air temps down, that's why I sold my 76mm turbo.

[ March 19, 2012, 07:48 PM: Message edited by: racsirx ]
 
Posted by 93ex chp (Member # 9016) on :
 
I was looking into the that precision turbo..would I see turbo lag with that 88mm?
 
Posted by racsirx (Member # 1710) on :
 
Not much difference than a 76mm, it's a T-4 flange with a .96 A/R
 
Posted by 93ex chp (Member # 9016) on :
 
Ok..what about the gtk 850 or 1000 turbo? Is that any good? And how much better is the ball bearing turbo vs the pt8847?

[ March 20, 2012, 04:13 PM: Message edited by: 93ex chp ]
 
Posted by 93 twintrbo (Member # 10475) on :
 
I would not recommend a turbonetics product. Seen too many failures. I would highly recommend a precision turbo or borg warner turbo. look into the Precision CEA 7175. Been proven to 1000whp and will spool super fast on a v8.
 
Posted by 93ex chp (Member # 9016) on :
 
Ok..yeah I'm leaning toward the precision turbo or getting one custom to my set up.
 
Posted by 84SVOrick (Member # 9039) on :
 
what 302 block can hold 1000hp?
 
Posted by svfreerider87 (Member # 5748) on :
 
quote:
Originally posted by 84SVOrick:
what 302 block can hold 1000hp?
boss 302 or a dart.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com