Author
|
Topic: CALIPER QUESTIONS???
|
8lbCoupe
¯
Member # 11416
|
posted
is there anyone board that can dis-assemble a set of cobra calipers so i'm able to get them powder coated and then re-assemble them?? [ February 18, 2012, 06:30 AM: Message edited by: 8lbCoupe ]
-------------------- "HEAVY DOSAGE"
Posts: 383 | From: Traffic | Registered: Nov 2011
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
Very easy to do with a 1x2 board and an air compressor both pistons will come right out when air is placed in the fitting. The board prevents the piston from coming completely out, this is necessary so you can get the second piston out as well as preventing damage to the pistons. Would recommend a seal kit when putting back together. This is something I could do, but I am in Stockton
-------------------- Tim (Musttanguy) 97 5.0 coupe 82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
8lbCoupe
¯
Member # 11416
|
posted
What's the price on takin them apart and puttin them back together again??
-------------------- "HEAVY DOSAGE"
Posts: 383 | From: Traffic | Registered: Nov 2011
| :
|
|
8lbCoupe
¯
Member # 11416
|
posted
Is there anybody closer to the bay area that can do this??
-------------------- "HEAVY DOSAGE"
Posts: 383 | From: Traffic | Registered: Nov 2011
| :
|
|
8lbCoupe
¯
Member # 11416
|
posted
TTT
-------------------- "HEAVY DOSAGE"
Posts: 383 | From: Traffic | Registered: Nov 2011
| :
|
|