|
Author
|
Topic: bogging out after i mash the gas
|
triple b
¯
Member # 8763
|
posted
 
 
I have a 306/ 2.02 edelbrock jr. ported, 1.6RR, trick flow cam 2, 19lbs. c&l, bbk CAI, edelbrock rpm 2 intake, tremec 3550, 3.55. 255 fuel pump, bbk fuel pressure reg @ 44psi ( any lower it bucks and pings). My problem is when i stomp on the gas it revs up to 2k falls on it face then roars on to redline from 3k on why? I t almost like a turbo lag. from 2k to 3k
--------------------
1988 4cyl conv 306 HCI "sasha"
2004 tahoe
Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|
Marks93
¯
Member # 11130
|
posted
With the mods you have listed, my first guess would be the 19# injectors needing to be upgraded to 24# (along with the MAF). Not enough fuel?
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
LXjames
¯
Member # 10791
|
posted
Change those injectors and maf your overworking them anyways so it's time to get new ones I would almost look at the chart and see where your horsepower matches the pounds per hour. someone has link around here some where..... actually its an old post of mine look for one called lil ric and neight it's on that page
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
|
|
Chp23109
¯
Member # 10540
|
posted
its your engine shaking?
--------------------
Banned for violating everything from the anti-ghetto sign and what's written below it. And we were doing so good lately with these types of people too.
^^^^^^^
you read the above and this is your reply to us-
"Why I got ban. He talked me crab word to me. Hmmm lmk thank"
Seriously? Does yous gots ta ax Y? Der be de stuff written unda der no ghetto sign G. Readz iT, itz beez 'bout it bout it youz.
We're not even going to get into getting banned for making fake accounts here http://www.californiafords.com/cgi-bin/ultimatebb.cgi?ubb=recent_user_posts;u=00008902
Posts: 216 | Registered: Dec 2010
| :
|
|
copcar
¯
Member # 10113
|
posted
19's... really? With a C&L meter? C'mon man, get the right injectors on that car. 30's minimum. The link above is accurate but is not up to date. Current specs show to run at 85% duty cycle due to the E10 fuel we have now. And NEVER, and I mean NEVER run a C&L meter unless you are running a Moates Qh or a Tweecer. The transfer rate on those meters is horribly lean and the repeatability is shaky at best.
--------------------
12.37@ 109.34.NA 894DA Old Nitto 555 DR's Gt40 irons. B cam/1.7's, All emissions equipment on the car, stock air box. UPR catted X pipe.
Posts: 485 | Registered: Jun 2010
| :
|
|
triple b
¯
Member # 8763
|
posted
no shake I have the 24's and 30's i have a tube for the 24's but i got them from the pick-n-pull yard. I been holding back on useing them because they are dirty and i want them to be flow tested and cleaned. I also have a pro-m but need to be recalibrated any way i cut the cake it going to cost money!
--------------------
1988 4cyl conv 306 HCI "sasha"
2004 tahoe
Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|
copcar
¯
Member # 10113
|
posted
I don't care what tube you have for that meter I would still ditch it. Yes it will cost you money however a Pro-m "calibrated" for 30's is far cheaper than a blown head gasket.
--------------------
12.37@ 109.34.NA 894DA Old Nitto 555 DR's Gt40 irons. B cam/1.7's, All emissions equipment on the car, stock air box. UPR catted X pipe.
Posts: 485 | Registered: Jun 2010
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
quote:
Originally posted by copcar:
I don't care what tube you have for that meter I would still ditch it. Yes it will cost you money however a Pro-m "calibrated" for 30's is far cheaper than a blown head gasket.
when i was using the c&l it would have a surging idle..sometime it wouldnt fun right..you gotta deal with clocking bullshit and what not...i listened to cop car and purchased a pro-m for 30#s and my car cruises,idles,and performs much better than that c&l crap ever gave me
--------------------
1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
copcar
¯
Member # 10113
|
posted
Hey Jayjay. very happy it is working for you. FYI the transfer function in the meter you have is identical to the Ford unit which was used in the Gen-1 Lightning conversions offered years ago. That kit came with a new eec (a9p if memory serves me correctly), that meter and a set of injectors.
--------------------
12.37@ 109.34.NA 894DA Old Nitto 555 DR's Gt40 irons. B cam/1.7's, All emissions equipment on the car, stock air box. UPR catted X pipe.
Posts: 485 | Registered: Jun 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
