Author
|
Topic: power balance test
|
MACK.GT
¯
Member # 10461
|
posted
So we did a power balance test on my 94 gt, and cylinder no.1 was lower then the rest. I have a stock intake, does anyone know is the intake design is at fault? I think , that I read somewhere that the runner design is most restrictive on the no 1 cylinder. thanks-
Posts: 446 | From: 510 | Registered: Nov 2010
| :
|
|
turbo50
¯
Member # 6700
|
posted
The intake has nothing to do with leakdown or compression.
If all of your readings were within 10% of each other you are good to go but it has nothing to do with the intake design.
I have done tons of leakdown and compression tests on long runner efi 302s..no commonality.
Good question though.
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
MACK.GT
¯
Member # 10461
|
posted
Ok, cool. Good to know. I guess it might be a bad injector , the compression test readings were similar to the others. Thanks for the advice.
Posts: 446 | From: 510 | Registered: Nov 2010
| :
|
|