T O P I C R E V I E W
|
Nasty Notch
Member # 8863
|
posted
Does anybody on here have one?? If so how do u like it and how was the fit?
|
blown95svt
Member # 8893
|
posted
Wasn't that bad. I put one on a friends car, we had to relocate the oil filter, drill the header bolts out. And a bunch of little stuff. Other than that it was ok. I'm pretty sure my friend will chime in.
|
cali95gt
Member # 8940
|
posted
There is a ton of info on it over in corral.net.... I've also thought of ditching my blower and going turbo but I'm on the fence
|
MikeD.
Member # 8060
|
posted
The on3, from my readings, is a DECENT kit for what you pay. IIRC, I called, and for a COMPLETE kit, from twerbo to injectors, to y-pipe ran 2600 shipped. There's countless threads, pictures, and information on corral. Everyone that has used them seems to have had very minor issues. Just don't ask any guys that have run 5k+ kits they will dog them hard. You'll get the usual you get what you pay for, cheap chinese junk, and so forth.
|
50DADDY
Member # 3076
|
posted
Ill be running some so-called "Chinese junk" soon(thats what people say when they spent too much for their turbo kit).We'll see how junky it really is.
|
AR_Stang
Member # 10223
|
posted
There good kits. Just upgrade the turbo to a mp T70. I personally have a ponydown stg 2 kit. Can't go wrong with a turbo
|
turbo50
Member # 6700
|
posted
Ive installed two so far.......no complaints.
|
707notchback jaejae
Member # 7958
|
posted
there fine for the cost..but expect to add $$ toward fuel,tune etc...
|
Nifty50
Member # 9987
|
posted
quote: Originally posted by 50DADDY: Ill be running some so-called "Chinese junk" soon(thats what people say when they spent too much for their turbo kit).We'll see how junky it really is.
pretty much , right . Ive seen people run dirt cheap turbo kits (Ebay) and run single digits with the exception of a Garret T-76 and clown other people with big buck turbo kits. whatever you do if you want it to be streetable and spool fairly quik keep the A/R ratio of the turbo UNDER .96
|