T O P I C R E V I E W
|
87LXblackpearl
Member # 10409
|
posted
how hard is it to put fr500 10.5 on a foxbody lx with stock 8.8 rear end??
|
Eddie510-
Member # 2354
|
posted
Not hard at all . Jack up the car, make sure you put Jackson for safety. Bolt urn old rim, and put on the new fr 500s on. Make sure its not bigger than a 295 in the rear. You might have rubbing issues
|
SIC70STANG
Member # 4347
|
posted
Jackson for safety? Like Michael Jackson?
|
89 306
Member # 9042
|
posted
this has to be the post of the year!!
|
sydewayzLX50
Member # 10217
|
posted
you'll have to remove the quad shocks
|
SIC70STANG
Member # 4347
|
posted
You will have rubbing issues if you use jackson for safety and small children are around.
|
Eddie510-
Member # 2354
|
posted
quote: Originally posted by SIC70STANG: You will have rubbing issues if you use jackson for safety and small children are around.
Lmaooo fu bro. ... Its the correct spelling on this phone... I meant jack stands. .... Well my buddy had 295s fr500 with the quad shocks and no rubbing issues
|
1RaW93SvT
Member # 9151
|
posted
[QUOTE]Originally posted by 87LXblackpearl: how hard is it to put fr500 10.5 on a foxbody lx with stock 8.8 rear end?? [/QUOT
it FITS LIKE A FUCKING DREAM BRO!! remove the quad shock.. install upper and lower control arms for strength!! roll the quarter panels and slap a nitto 315 on that bitch and drill it to the ground with coilovers and look sexy!!! i dont know how to post pics or i would!!
i have a 1990 lx hatch with 17/09 17/10.5s with a nitto 555r 315/35/17 in rear and a 245/45/17 in front and i jack off looking at the car all the time hahaha!!!
there was a post that 50deep posted in dragracing section that had like 6 pics of my car in it red with blk moldings and blk/polished lip fr500s!! LOOKS GREAT!!!!
|
87LXblackpearl
Member # 10409
|
posted
so i removed the quads tryed putting on the fr500 it hits my tail pipe.. what now it also seems to be pretty close to the inner wheel well
|
FOXX5.0
Member # 9094
|
posted
quote: Originally posted by SIC70STANG: You will have rubbing issues if you use jackson for safety and small children are around.
Hahahahahaha dam
|
triple b
Member # 8763
|
posted
quote: Originally posted by 1RaW93SvT: [QUOTE]Originally posted by 87LXblackpearl: how hard is it to put fr500 10.5 on a foxbody lx with stock 8.8 rear end?? [/QUOT
it FITS LIKE A FUCKING DREAM BRO!! remove the quad shock.. install upper and lower control arms for strength!! roll the quarter panels and slap a nitto 315 on that bitch and drill it to the ground with coilovers and look sexy!!! i dont know how to post pics or i would!! Aye what axles r u running 5 lug but do you have diskbrakes?
i have a 1990 lx hatch with 17/09 17/10.5s with a nitto 555r 315/35/17 in rear and a 245/45/17 in front and i jack off looking at the car all the time hahaha!!!
there was a post that 50deep posted in dragracing section that had like 6 pics of my car in it red with blk moldings and blk/polished lip fr500s!! LOOKS GREAT!!!!
|