Author
|
Topic: rod piston question.
|
Pure Stang
¯
Member # 7251
|
posted
trying to learn a little something. can you just install a 5.400 (i think need to double check) rod and a 30 over bore piston to a stock block just boring the block? or does crank need to be changed? what is stock length? if it works with a stock crank what will be the ci? thanks peeps
-------------------- HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother. 04/24/87 - 11/23/2012
90 lx 347 RIP 86 gt 89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
5.090" is the stock 302 rod length. Boring the block will not affect anything with the rod length/ratio. The 289 used a 5.155" rod and most stroker kits use a 5.400" rod, though some Probe kits use a 5.315" rod to move the ring lands up out of the wrist pin area.
If you're using a stock 302 crank, you need a 5.090" rod. Boring the block .030 over will get you 306 cubic inches with a stock 302 crank. [ May 26, 2011, 01:08 AM: Message edited by: wilit ]
-------------------- "If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
Cool thanks.
-------------------- HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother. 04/24/87 - 11/23/2012
90 lx 347 RIP 86 gt 89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
You can get .030" overbore pistons for a 5.400" rod and 3" crank. It's what they call a long rod 306.
The longer the rod, the shorter the compression height of the piston in order to run in the same deck height. Compression height = distance from wrist pin to top of piston.
Deck height = 1/2 stroke + rod length + compression height IE 8.2" = 1.5 + 5.09 + compression height or 8.2" = 1.5 + 5.4 + compression height
Work the formula for compression height and find pistons with the correct bore and compression height. Hint: Probe makes them. Remember to check the rod specs as well. .927" pin bore in the piston will not work with a rod that has a .912" pin bore. Same goes for the big end. Some 5.4" rods are setup for a SBC rod journal size instead of a Ford journal size. The crankshaft can always be ground down to SBC size....and you can off-set grind the crank for more stroke. That's how I got a 3.10" stroke out of a stock 5.0 crankshaft. I had the journals ground down to SBC size (2.0") and offset to increase the stroke. 5.4" rods and custom pistons (using formula above to figure out compression height) and I had a mild Stroker. You can also offset grind for less stroke, or go down to a Honda Journal size! [ May 26, 2011, 10:50 AM: Message edited by: 93PONY ]
-------------------- www.advancedenginedevelopment.com SCT dealer Dynotuning
(916)715-7569
Posts: 4265 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
turbo50
¯
Member # 6700
|
posted
Shaun is correct, however, he either does, owns or knows someone with a machine shop lol
That stuff adds up at a machine shop, as do the pistons.
I think you could stroker kit it and call it real if you dont already have ur parts.
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
I have the pistons and rods. Had them in my garage already. Just spare parts just trying to figure out what to do with them. Forged pistons and h beam rods.
-------------------- HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother. 04/24/87 - 11/23/2012
90 lx 347 RIP 86 gt 89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
triple b
¯
Member # 8763
|
posted
I cant remember where i saw it but if google long rod 306 you can find the piston you need to make that work. I think its a chevy 327 piston not 100% sure tho.
-------------------- 1988 4cyl conv 306 HCI "sasha" 2004 tahoe Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|