T O P I C R E V I E W
|
707notchback jaejae
Member # 7958
|
posted
im only running a tfs1 with 1.6's do the stock springs on twisted wedge heads suck?..
|
89bluenotch
Member # 7454
|
posted
I have heard they aren't the best! But I'm running them haven't had any problems yet. I have put 5,000+ miles on mine so far.
|
Camara90
Member # 134
|
posted
They will be fine for that cam. Where are you getting the heads from?
|
707notchback jaejae
Member # 7958
|
posted
quote: Originally posted by Camara90: They will be fine for that cam. Where are you getting the heads from?
from a friend..used heads so i was thinking bout doing it..but i really dont want to..
|
Camara90
Member # 134
|
posted
do you know if they are the real old original sets or not?
|
73 on DUBS
Member # 5677
|
posted
wat trick flows are better the old design or the new ones
|
Camara90
Member # 134
|
posted
the older sets were known to eat through valve guides.
|
68stanger
Member # 7842
|
posted
The stock valve springs will handle that stage 1 cam with no issues....the only reason to swap out (in your case) is if there weak from having a shit load of miles on them, other then that run them as is.
|
707notchback jaejae
Member # 7958
|
posted
quote: Originally posted by Camara90: the older sets were known to eat through valve guides.
hmmm..how do i tell the difference?
|
73 on DUBS
Member # 5677
|
posted
i think the older ones dont have numbers outside
|
Camara90
Member # 134
|
posted
quote: Originally posted by 707notchback jaejae: quote: Originally posted by Camara90: the older sets were known to eat through valve guides.
hmmm..how do i tell the difference?
are they pedestal mount or stud mount rockers?
|
gercolla1
Member # 3068
|
posted
quote: Originally posted by 707notchback jaejae: quote: Originally posted by Camara90: the older sets were known to eat through valve guides.
hmmm..how do i tell the difference?
the older set will not have trickflow engraved on front or the back of head and only id is if you crack the valve cover off it will have a tfs### number between the rockers
|
707notchback jaejae
Member # 7958
|
posted
quote: Originally posted by gercolla1: quote: Originally posted by 707notchback jaejae: quote: Originally posted by Camara90: the older sets were known to eat through valve guides.
hmmm..how do i tell the difference?
the older set will not have trickflow engraved on front or the back of head and only id is if you crack the valve cover off it will have a tfs### number between the rockers
thanks bud
|