|
Author
|
Topic: will a t5 yoke fit on a classic mustang driveshaft?
|
sic70stang
CAFords OG
Member # 4347
|
posted
 
 
Doing my t5 swap and found converted driveshafts for $ 550 but I measure this driveshaft and it is the same length. Can I put one off a 5.0?
--------------------
The anti-crew
1987 rolling safety violation.
Posts: 6943 | From: California | Registered: Jul 2005
| :
|
|
70mach351
¯
Member # 7528
|
posted
you will need to change the 8.8 flange toe a 9 inch one for the rear if thelengths are the same
--------------------
70 Mach 1 gettin a make over
2001 Ford F250 Crew Cab 7.3
Posts: 1762 | From: EDH | Registered: Mar 2007
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
What length driveshaft do you need? I have a steel one that I use to use before I got an aluminum one. I had it made for a t5 coversion in my 64 1/2.
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
tangerine67
¯
Member # 8071
|
posted
quote:
Originally posted by LUCKY 187:
Doing my t5 swap and found converted driveshafts for $ 550 but I measure this driveshaft and it is the same length. Can I put one off a 5.0?
yes sir u can use it ...all u need is the u joints that are slighty different in size .... i forget which ones are bigger/smaller ...u can tell by sizing em up....any auto parts store has them. i did it on my 67 .. took it to San Jose Driveline ...they switched the u joints and balanced it for me
[ April 18, 2011, 03:30 PM: Message edited by: tangerine67 ]
--------------------
Built Ford Tough
Posts: 41 | From: bay area | Registered: Dec 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
