T O P I C R E V I E W
|
trickflow211
Member # 8503
|
posted
I installed a new 255 pump into my 5.0 fox ... also had to install a new harness because mine was all coroded from gasoline eatijg it away ... so after I installed new pump and put tank back up when I try to start car it won't start and fuel pump doesn't turn on ... I am going to drop it again today but wat should I look for or test cus I'm pretty sure I hooked everything up correctly ... could my relay switch some how went out even tho it was working before I dropped it ?! Thanks guys !
|
tribal3579warrior
Member # 5663
|
posted
Check your fuel pump cutoff switch in the trunk.
|
68stanger
Member # 7842
|
posted
check if your actually getting power to the pump first, if not start working your way up front to find the source (relay, bad connections etc).
|
trickflow211
Member # 8503
|
posted
Sorry forgot to state that car was running before I took pump out
|
Duncan Motors
Member # 7045
|
posted
above help is on point
|
Sic Beast
Member # 6771
|
posted
Check your inertia switch n the trunk. Same exact thing happened to me...had power but pump wasn't priming and for some reason I changed the switch and that was it.
|
trickflow211
Member # 8503
|
posted
Where would the relay be ?! I have tried two different pumps and they are both not turning on when I turn key ...wat should I check for now ?!
|
trickflow211
Member # 8503
|
posted
Where is switch in trunk located ?!
|
79 cobra
Member # 10137
|
posted
take of the plastic piece in the trunk and its a lil black box with red button
|
lucius50fox
Member # 10791
|
posted
chad this james, after all that shit it still didnt run?????fuck
|