T O P I C R E V I E W
|
Fast92lxcoupe
Member # 8221
|
posted
Ok. So I swapped out the trans and now the car stalls after I drive and come to a stop. I didn't swap the computer. Should I swap it? Or could it be something else?
|
Blind
Member # 3052
|
posted
VSS isn't hooked up right most likely, speed sensor on the speedo cable in the trans.
|
blown95svt
Member # 8893
|
posted
I had a friend who also did the swap. His was hit or miss if it stalled. His fix was the 5speed PCM.
|
Fast92lxcoupe
Member # 8221
|
posted
quote: Originally posted by Blind: VSS isn't hooked up right most likely, speed sensor on the speedo cable in the trans.
well, my speedometer isn't working now. Is that a good a sign that the vss is my problem?
|
RAP66
Member # 3360
|
posted
quote: Originally posted by Fast92lxcoupe: quote: Originally posted by Blind: VSS isn't hooked up right most likely, speed sensor on the speedo cable in the trans.
well, my speedometer isn't working now. Is that a good a sign that the vss is my problem?
not eaxctly; it's a sign that your speedo isnt working. VSS can still be working w/o the speedo.
Did you swap from auto to stick? IF so the idle speeds in the ECU are slightly different, you will need at a min a chip with the idle speed set up or a 5spd ECU.
|
racsirx
Member # 1710
|
posted
Wow, I have done 5 speed conversions and still ran the an Automatic Computer and never had a problem, I actually like the automatic computer better, more of an aggressive timing. [ November 14, 2010, 01:21 PM: Message edited by: racsirx ]
|
Cstang50
Member # 4925
|
posted
quote: Originally posted by racsirx: Wow, I have done 5 speed conversions and still ran the an Automatic Computer and never had a problem, I actually like the automatic computer better, more of an aggressive timing.
|
73 on DUBS
Member # 5677
|
posted
yup i used the auto computer before no problem u probably gotta turn up the idle a lil bit
|
Ryan_LX
Member # 7089
|
posted
quote: Originally posted by racsirx: Wow, I have done 5 speed conversions and still ran the an Automatic Computer and never had a problem, I actually like the automatic computer better, more of an aggressive timing.
I also have a auto brain in my fox so that shouldnt the issue
|
707notchback jaejae
Member # 7958
|
posted
try a base idle reset..im running a auto computer with a 5 speed..no probs..its used to die but the base idle reset did it for me
|
CHP2981
Member # 9240
|
posted
I was just on the subject at work with one of the mechanics so I don't know if there's any truth to it but he said when doing a T5 conversion he changes the module on the distributer to a stick one. I don't know if that works but I'd like to know if it does.
|
Darkhorse1
Member # 10341
|
posted
quote: Originally posted by racsirx: Wow, I have done 5 speed conversions and still ran the an Automatic Computer and never had a problem, I actually like the automatic computer better, more of an aggressive timing.
X2
|