|
Author
|
Topic: Engine help
|
livinindabay
¯
Member # 9465
|
posted
 
 
So, I put together my motor on my car recently, has a 304 block, will aluminum edelbrock performer heads, 1.6 roller rockers, pushrods, 24lb injectors with the calibrated maf, longtubes, edelbrock performer intake, and it starts up fine, but when I hit the gas it starts to pop from the intake, wont even take off right then it starts to overheat, I check the firing order and its fine. Im confused on what it could be the timing is set on 12 degrees.
--------------------
91 Coupe
Posts: 41 | From: WSU | Registered: Sep 2009
| :
|
|
copcar
¯
Member # 10113
|
posted
first pull codes
Then check
firing order on plugs
vacuum leaks
check all grounds.
If that does not work
check the rockers, make sure they are not over tight.
Make sure all connections are secure and there are no freyed wires
--------------------
12.37@ 109.34.NA 894DA Old Nitto 555 DR's Gt40 irons. B cam/1.7's, All emissions equipment on the car, stock air box. UPR catted X pipe.
Posts: 485 | Registered: Jun 2010
| :
|
|
livinindabay
¯
Member # 9465
|
posted
Thanks I need to check those, but it might be the distributor because i forgot it outside and the rain might of fried it,
--------------------
91 Coupe
Posts: 41 | From: WSU | Registered: Sep 2009
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
