T O P I C R E V I E W
|
Jonny421Blaze
Member # 9303
|
posted
I have a 88 mustang gt, and I swapped to the cobra five lug brakes. I'm using stock springs. The ball joints are bad and I need new joints. Does n e one have an idea if there is a difference between the stock 88 gt ball joints and the ball joints for the 93 mustang? TY for n e help, really appreciate it.
|
Adam5.0
Member # 6995
|
posted
they changed in 94. get those, should bolt right up with the spindles. [ November 10, 2010, 11:51 AM: Message edited by: Adam5.0 ]
|
Jonny421Blaze
Member # 9303
|
posted
Thanks for your reply. but I'm not sure if you mean that I should get the 94 ball joints. And if so do the fit on the 88 A control arm? I know the cobra brakes had a shorter stem on the ball joint. So is that why you say go with the 94 ball joint?
|
Adam5.0
Member # 6995
|
posted
the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints [ November 10, 2010, 01:59 PM: Message edited by: Adam5.0 ]
|
Jonny421Blaze
Member # 9303
|
posted
TY Adam5.0 that was helpful.
|
sydewayzLX50
Member # 10217
|
posted
quote: Originally posted by Adam5.0: the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints
+1 the 94-up ball joints work great w/ sn95 spindles, no spacer needed, and fit in fox body a-arms (have to be removed & replaced with a press)
|