|
Author
|
Topic: Ball Joints
|
Jonny421Blaze
¯
Member # 9303
|
posted
 
 
I have a 88 mustang gt, and I swapped to the cobra five lug brakes. I'm using stock springs. The ball joints are bad and I need new joints. Does n e one have an idea if there is a difference between the stock 88 gt ball joints and the ball joints for the 93 mustang? TY for n e help, really appreciate it.
--------------------
Rebuilt '88 302. E303, BBK Cold Air, 70mm MAF, 70mm BBK TB, TF heads, Shorty BBK headers, Cobra Manifold, 19lbs. inj, M2300K brake kit.
Posts: 33 | From: East Bay | Registered: Jul 2009
| :
|
|
Adam5.0
¯
Member # 6995
|
posted
they changed in 94. get those, should bolt right up with the spindles.
[ November 10, 2010, 11:51 AM: Message edited by: Adam5.0 ]
--------------------
want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
Jonny421Blaze
¯
Member # 9303
|
posted
Thanks for your reply. but I'm not sure if you mean that I should get the 94 ball joints. And if so do the fit on the 88 A control arm? I know the cobra brakes had a shorter stem on the ball joint. So is that why you say go with the 94 ball joint?
--------------------
Rebuilt '88 302. E303, BBK Cold Air, 70mm MAF, 70mm BBK TB, TF heads, Shorty BBK headers, Cobra Manifold, 19lbs. inj, M2300K brake kit.
Posts: 33 | From: East Bay | Registered: Jul 2009
| :
|
|
Adam5.0
¯
Member # 6995
|
posted
the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints
[ November 10, 2010, 01:59 PM: Message edited by: Adam5.0 ]
--------------------
want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
Jonny421Blaze
¯
Member # 9303
|
posted
TY Adam5.0 that was helpful.
--------------------
Rebuilt '88 302. E303, BBK Cold Air, 70mm MAF, 70mm BBK TB, TF heads, Shorty BBK headers, Cobra Manifold, 19lbs. inj, M2300K brake kit.
Posts: 33 | From: East Bay | Registered: Jul 2009
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
quote:
Originally posted by Adam5.0:
the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints
+1 the 94-up ball joints work great w/ sn95 spindles, no spacer needed, and fit in fox body a-arms (have to be removed & replaced with a press)
--------------------
-90 Vert-SOLD
-91 Notch-SOLD
-2000 Explorer 5.0-SOLD
-72 Maverick-SOLD
-2004 GT, vortech V2 si, 10 psi-
-2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
