T O P I C R E V I E W
|
EPIK
Member # 7481
|
posted
So long story short, I screwed up when I was jacking up my car, the jack slipped & busted the power steering hard line that goes into the front of the rack & pinion. Is this hard to change? can I just replace the line, & could I pick this up at Napa or Auto Zone? Also is there a specific name for this particular line?
Thanks...

 [ August 19, 2010, 04:18 PM: Message edited by: EPIK ]
|
EPIK
Member # 7481
|
posted
Anybody???
Can I replace just the line, & would the line be the same on a Fox body rack?
|
wilit
Member # 3367
|
posted
In that first pic you caught a drop of fluid falling in mid air! It looks hella cool.
Anyway, I don't know Foxes that well, but you just need to figure out if that the high pressure line or low pressure line. Follow it back to the pump. If it attaches at the pump with a hose clamp on the bottom of the pump body, it's the low pressure line. If it attaches at the side of the body with a screw fitting, it's the high pressure line.
|
GT302PONY
Member # 6658
|
posted
A hydraulic place can make it to the exact size
|
EPIK
Member # 7481
|
posted
It actually looks like it doesn't even go all the way to the pump, but to another section of the rack... [ August 19, 2010, 08:32 PM: Message edited by: EPIK ]
|
EPIK
Member # 7481
|
posted
This is where I traced it to.
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by EPIK: This is where I traced it to.
pick an rob an bring tools an just take one of rack an pinion
|
50Reasons
Member # 6452
|
posted
Go to pick and pull and rob that part for the entrance fee
|
rollininmy50
Member # 9067
|
posted
pic n pull
|
Duncan Motors
Member # 7045
|
posted
i got one already taken off for stuff like this,come get it if u want 707 297 0868
|
EPIK
Member # 7481
|
posted
Got it situated. Thanks to Stangs R Us for donating the line, & thanks to 50 Deep & Mach 103 for lending a hand with the repair...
|