Author
|
Topic: starter stuck on!
|
adrce55
¯
Member # 9985
|
posted
im having a problem with my 92 gt.
observations
1. when i go to turn the ignition key, the starter is already starting to engage in position 2. i havent even turned the key all the way and the starter is already turning.
2. once the car is running, you can definitely heard something spinning, probably the starter.
i already changed the starter thinking the solenoid on the starter was jacked, but that didnt help.
any thoughts?
thanks in advance [ July 02, 2010, 12:34 AM: Message edited by: adrce55 ]
Posts: 33 | From: Milpitas, CA | Registered: May 2010
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
could be the fender mounted solenoid sticking.
-------------------- It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
Ignition switch.
-------------------- "Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
adrce55
¯
Member # 9985
|
posted
i removed the connection that goes from the fender mounted solenoid to the starter, and listened for the clicking/switching of relay.
i actually hear it click twice. once when i put it in position 2 (on) and then another when i turn the key all the way as if im trying to start the car.
is that the right amount of clicks? im starting to think i may have a short some where...
Posts: 33 | From: Milpitas, CA | Registered: May 2010
| :
|
|
streetsleeper
¯
Member # 9895
|
posted
Test the solenoid with a DMM.. energize the coil and check for continuity onthe other posts and see if it stays stuk.. if the solenoid tests good then u have a short that's causing the solenoid to energyse on the acc switch
Posts: 177 | From: Hayward Ca | Registered: Apr 2010
| :
|
|
5.0 CGS
¯
Member # 9567
|
posted
HEY BRO I RECENTLY HAD THE SAME PROBLEM WITH MY 91 5.0 I ALSO THOUGHT IS WAS MY STARTER SO I REPLACED IT AND NOPE SAME PROBLEM SO THEN I REPLACED THE STARTER SOLENOID ON THE FENDER WALL AND NO BUT THEN SOME ONE TOLD ME THAT THE SOLENOID BRAND WAS TOO CHEAP SO I HAD TO RETURN IT AND UPGRADE TO A MORE EXPENSIVE SOLENOID SO I ENDED UP BUYING A SELECT SOLENOID AND PROBLEM SOLVED THE SOLENOID COST ME ABOUT $27 AT KRAGENS
GOOD LUCK
Posts: 104 | From: stockton | Registered: Nov 2009
| :
|
|