|
Author
|
Topic: dyno numbers for new 347
|
93 hatch
¯
Member # 8100
|
posted
 
 
378 hp and 378 torque .combo is SHP dart 10.1 347 AFR 185 72cc comp cam 238 / 250 duration 579 lift with RPM 2 intake 65 mm TB with small ford racing headers .tune is Anderson PMS . The motor need 1 3/4 long tube headers and a TB and it should be over 400 at the tires .
--------------------
Dart shp 364 AFR 195.off the shelf cam TKO 600 twin disc RST 11.36 @ 120 N/A
Posts: 502 | From: sants rosa | Registered: Dec 2007
| :
|
|
forced331
¯
Member # 1270
|
posted
Congrats! Did you dyno at RPM?
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
SteveL
¯
Member # 1241
|
posted
If you already have a reasonable set of long tubes, you can save some money by not going to 1 3/4. I don't think you'll gain much.
Dart 4.125 bore 347 with AFR 205s. The cam is similar:
Posts: 578 | From: San Jose, CA | Registered: May 2002
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
nice numbers. abd it must sound good. big cam
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
what made u change your setup?
--------------------
1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
93 hatch
¯
Member # 8100
|
posted
I dont have long tubes on the car ! and that was 32 timing from 3600 to 6000! The reason for the change was i knew the stock short block wasent going to last forever i beat the shit out of that thing with the blower and then ran it without the blower one last time and the thing went 12.8 at 107 on a 1.90 60 foot .The old 302 was still runing when i pulled out now it's on the stand in my garage
--------------------
Dart shp 364 AFR 195.off the shelf cam TKO 600 twin disc RST 11.36 @ 120 N/A
Posts: 502 | From: sants rosa | Registered: Dec 2007
| :
|
|
Stan G
¯
Member # 6226
|
posted
Those are nice numbers...
Are the headers 1 5/8th's with the standard ball/socket collectors ?
whats the rest of the exhaust system ?
--------------------
1985 RX-7, 347/T-5 , T/F T/W heads, typhoon intake, Tfs2 cam, pulleys, 2500 lbs .
3.63 rear gears , Megasquirt
Posts: 105 | From: Sun Coast , Florida | Registered: Nov 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
