|
Author
|
Topic: gt40 heads , 1.6 roller rockers
|
87 4spd GT
¯
Member # 9216
|
posted
 
 
SO I bought some used GT40 heads, that were off a 95 cobra, they came with svo 1.6 roller rockers. Now will the rockers clear the valve covers and also they turn a bit from left to right after being bolted down, is this normal?
--------------------
Putting a 'Playboy' brand g-string on your 'ol lady does not make her a Playmate
Posts: 49 | From: Redding | Registered: May 2009
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
Only way to really tell if they will clear is to put em on and turn the motor by hand,most will clear stock valve covers though.And slight movement from side to side is normal.
--------------------
"Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
Krz88lx
¯
Member # 4261
|
posted
You can also run stock valve covers off a 94-95 gt they have a little more room than foxbody valve covers ![[patriot]](graemlins/patriot.gif)
--------------------
Krz4rd5
Posts: 1286 | From: san jOse | Registered: Mar 2004
| :
|
|
BruhBrahBrad
¯
Member # 9497
|
posted
quote:
Originally posted by Krz88lx:
You can also run stock valve covers off a 94-95 gt they have a little more room than foxbody valve covers
I've never heard that, I always hear about sn95 people switching to foxbody covers cause they are taller..
Posts: 1241 | Registered: Sep 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
