T O P I C R E V I E W
|
94onduces
Member # 9555
|
posted
just put a 95 cobra intake on my 94 gt not running any faster or better any ideals on what i need to do to get my stang right or if theres a tech out in the area that can come thru let me know [ March 04, 2010, 11:40 AM: Message edited by: 94onduces ]
|
UNTAMED HEAT COBRA
Member # 3835
|
posted
Timing adjustment throttle body adjustment if aftermarket changing throttle body to a 70mm that's wat I did.. But by the sound of it mostly like timing..
|
venomous99
Member # 1917
|
posted
have u checked ur vacuum? do that first and see if you're where u should be. ~20in/hg is about right.
|
92stangLX
Member # 3252
|
posted
Try this:
1. reset your idle 2. check for vaccum leaks 3. check/set fuel pressure 4. check/set timing 5. check all of your plugs and plug wires
Post back up once you have checked those things
|
84SVOrick
Member # 9039
|
posted
What other mods do you have? If its stock still then jus an intake isnt gonna give it tons of power, if anything u lost tons of bottom end torque but gain hogh wnp hp
|
94onduces
Member # 9555
|
posted
i dont have anything else just full exaust,cold air,and upper n lower, but now that i got the timing down i have no fuel pressure and i dont hear my fuel pump turning on. how could i test the fuel pump and or fuel system
|
MikeD.
Member # 8060
|
posted
You have no pressure or no guage? There's a shrader valve on top of your fuel raid turn the key on and open the shrader valve, if fuel shoots out you have some kind of fuel pressure. Without a gauge though, you won't know exactly how much.
|
94onduces
Member # 9555
|
posted
quote: Originally posted by MikeD.: You have no pressure or no guage? There's a shrader valve on top of your fuel raid turn the key on and open the shrader valve, if fuel shoots out you have some kind of fuel pressure. Without a gauge though, you won't know exactly how much.
i opened it and got no kind of fuel pressure at all and when i turn on the key i dont even hear the fuel pump prime @ all
|
84SVOrick
Member # 9039
|
posted
Check relay and fuses
|