T O P I C R E V I E W
|
306 fifty
Member # 6749
|
posted
hi i posted a couple of weeks ago because my car wasnt starting and most of the replys if not all of them were telling me to change my tfi module so i did. and i think i got a lil progress because when i start turning over the motor if cranks n cranks but no start. thats wit the kill switch off but when its turned on it turns over n then it makes a sucking noise and doesnt want to crank over any more. i think my timing is way off n thats y it wont start. after doing it for a few seconds it really smelled like gas. what do u guys think?
|
5.7L EATER
Member # 9451
|
posted
do ur timing first and if u smell raw fuel look for a leak
|
68stanger
Member # 7842
|
posted
whats the history of the motor? any recent work done or just a out of nowhere problem?
what have you done so far to fix the problem?
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: hi i posted a couple of weeks ago because my car wasnt starting and most of the replys if not all of them were telling me to change my tfi module so i did. and i think i got a lil progress because when i start turning over the motor if cranks n cranks but no start. thats wit the kill switch off but when its turned on it turns over n then it makes a sucking noise and doesnt want to crank over any more. i think my timing is way off n thats y it wont start. after doing it for a few seconds it really smelled like gas. what do u guys think?
ok here why your most likely to be smelling gas if i remember right you pulled the distributor out.now when you put back together your 180 out on the the timing.now the who you are going to fix this pull number one plug out stick your finger over the hole an tap the engine over when you feel the compression blow your finger of the hole look at the timing marks an look were the rotor point at line the timing marks up pull the distributor out an line up the right way
|
Ryan M
Member # 7089
|
posted
maybe ur kill switch is messed up
|
92stangLX
Member # 3252
|
posted
Sounds like some troubleshooting is in order before you replace any more parts
First, determine if you have spark and fuel. They make spark testers that go inline with your spark plug or u can pull one of the plugs and ground it out on the head.
Best way to check fuel is with a fuel pressure gauge.. if you don't have one either get one or maybe someone else has a good way.
Once you have determined that you are getting both spark and fuel then check your timing.
Try the tests above and then post back up
|
306 fifty
Member # 6749
|
posted
ok i have spark and fuel. im sure its the timing. so when i tap the motor over itll blow my finger off the hole and the timing mark was off by a lot from zero top dead center. so i rotated the crank backwards so it will line up wit 0 tdc. now when i take the dist off the rotor lined up it #1 cylinder. so i took the dist. off then pointed the rotor towards #1 cylinder and as i droped it in the rotor went to like cylinder number four. is that whats suppost to happen? im scared to turn over cus afraid something else might go wrong
|
inlaw80
Member # 9353
|
posted
keep us posted on the results .
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: ok i have spark and fuel. im sure its the timing. so when i tap the motor over itll blow my finger off the hole and the timing mark was off by a lot from zero top dead center. so i rotated the crank backwards so it will line up wit 0 tdc. now when i take the dist off the rotor lined up it #1 cylinder. so i took the dist. off then pointed the rotor towards #1 cylinder and as i droped it in the rotor went to like cylinder number four. is that whats suppost to happen? im scared to turn over cus afraid something else might go wrong
the rotor needs to be point towards the fire wall close to the 12 o clock postion
|
306 fifty
Member # 6749
|
posted
if i had to guess its pointing at like if it would 11 or 11:30
|
306 fifty
Member # 6749
|
posted
i cranked it over and it turned over twice and then the motor shook and the stoped turning over and sounded like a took sound. but keep turning over but made the same sound. does any one know somebody that neat town who can try to do the timing on my car?
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: if i had to guess its pointing at like if it would 11 or 11:30
pull out an rotate one tooth over
|
306 fifty
Member # 6749
|
posted
damm i already turned it over so it pointing towards like 1 o clock do i rotateby hand till timing marks line up?
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: damm i already turned it over so it pointing towards like 1 o clock do i rotateby hand till timing marks line up?
just start over i will be easyeir on you
|
306 fifty
Member # 6749
|
posted
sucess bitches it starts but runs like shit but it starts
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: sucess bitches it starts but runs like shit but it starts
the spark plugs are most likley fuel fouled an make sure the firing order right an congrats on getting your car started
|
306 fifty
Member # 6749
|
posted
explane firing order cus it doesnt run that bad the spout connector is out and runs good enough
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 306 fifty: explane firing order cus it doesnt run that bad the spout connector is out and runs good enough
go look at the post sidewaysx posted about crossed wire the fring order in there an have put a timing ght on it yet
|