T O P I C R E V I E W
|
trickflow211
Member # 8503
|
posted
hey i am going to be removing a t-5 transmission out of a 87 5.0 mustang tomorrow so i can get the transmission rebuilt, what would be the easyiest way to remove this transmission from the car?. your help would be greatly appreciated! thanks!.
|
MikeD.
Member # 8060
|
posted
1 bolt at a time.
|
jaejae
Member # 7958
|
posted
its fairly simple..unbolt the exhaust,unbolt the crossmember and clutch cable,then unbolt the tranny from the bellhousing..should come right out..and you might as well replace the clutch while you in there
|
turbo50
Member # 6700
|
posted
You are in concord? I will remove it and install it for you for $160
|
Duncan Motors
Member # 7045
|
posted
160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
|
trickflow211
Member # 8503
|
posted
thanks guys, and i am going to get it rebuilt, and then put it into my 90 AOD. =] hopefully it stops sprinkling so i can get outside and do it!
|
50 Deep
Member # 6216
|
posted
Yeah probably best just to remove the trans from the bellhousing. Much easier process if you don't need to mess with the clutch
|
Sic Beast
Member # 6771
|
posted
quote: Originally posted by Duncan Motors: 160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1 That is way cheap for tranny work
|
rollin5ive0
Member # 8592
|
posted
quote: Originally posted by Sic Beast: quote: Originally posted by Duncan Motors: 160 is way cheap, you will not find cheaper labor by someone that supposed to 50s pretty well. good deal
+1 That is way cheap for tranny work
cheap work comes along with a cheap job i always say!! naw turbo50 is a good mechanic go with him....shit i usually pull my own trannys but for 160 i might have him do it!!
|
drop88stang
Member # 9650
|
posted
Yeah thats cheap I might need you to do mine in a few weeks how long would it take to get it finished?
|