T O P I C R E V I E W
|
50 Deep
Member # 6216
|
posted
So its an 89 fox. 306 HCI. 30# inj and matching C&L. T-5 swap with auto computer.
What happens is when coming out of gear the cars rpm's drop like usual but on occasion will dip too low and die out. Car runs strong all through the rpm band and idles at about 900rpm. I've only gout about 30 miles on the maf and injectors so I'm not sure if the car is still learning how to meter the air or if its maybe the cam playing with the idle. When I had my 24# injectors it didn't really do it. Also was suggested to me that the automatic computers can somehow contribute to this issue. The IAC and all that is clean but I will be swapping in a spare one just to check. Maybe its something that can be tuned out?
So what do you all think? Just want to get some suggestions from others who may have had the same issues.
|
89bluenotch
Member # 7454
|
posted
My car has done the same thing probably twice in the last 8 months or so. I honestly think it's my C&L mass air, People either love them or hate them it seems like. I am going to change mine out asap
|
50 Deep
Member # 6216
|
posted
yeah i have heard mixed reviews about them. i had a buddies C&L with my 24's and it ran fine, then i have a buddy with one and 42's and his runs good but is tuned. From what i understand the sample tubes just fool the maf so it adds more fuel. not sure if im cutting it too close with those 30's and it might be best to have it corrected in a tune.
|
707vibrantcobra93
Member # 4702
|
posted
I doubt the 30#s are too big and causing your stall. I would start with small things such as iac and tps. Where is your timing set at and what do the pugs look like. As far as the c&l I had many problems with them but not a stalling issue. Where is your base idle set at?
|
50 Deep
Member # 6216
|
posted
IAC and TPS came with my TB. I will swap on my stock ones for comparison.
Timing is at 12. Idle set at 800-900rpm
|
jaejae
Member # 7958
|
posted
my car used to do that all the time..some say it has something to do with the "vss" since your using an auto ecu like i do.. i just did a base idle reset and now its fine..lol
|
707vibrantcobra93
Member # 4702
|
posted
Your base idle is with the vacuum disconnected it should be around 500
|
50 Deep
Member # 6216
|
posted
Which vacuum line are you disconnecting?
Jae what is a base idle reset? I haven't had to do that on any of my stangs before
|
90FoX
Member # 1974
|
posted
quote: Originally posted by 50 Deep: Jae what is a base idle reset? I haven't had to do that on any of my stangs before
http://sbftech.com/index.php/topic,1031.0.html
I've heard the same about auto computers...was this car an auto before?
|
Adam5.0
Member # 6995
|
posted
I,ve had the same problem. try doing the base idle reset.
|
50 Deep
Member # 6216
|
posted
i will give it a shot tonight and see what happens. sounds like it could work. i have heard though that cars with auto computers and the 5 speed swap will have this problem
|
Cstang50
Member # 4925
|
posted
quote: Originally posted by 50 Deep: i will give it a shot tonight and see what happens. sounds like it could work. i have heard though that cars with auto computers and the 5 speed swap will have this problem
i have ran an auto computer with a five speed in two cars and never had a problem with that. try the idle reset helps a lot.
|
50 Deep
Member # 6216
|
posted
quote: Originally posted by 90FoX: quote: Originally posted by 50 Deep: Jae what is a base idle reset? I haven't had to do that on any of my stangs before
http://sbftech.com/index.php/topic,1031.0.html
I've heard the same about auto computers...was this car an auto before?
thanks for the link. yeah its was an auto originally.
Cstang50 i have heard of it happening to some and not to others. dunno if its actually the cause or what
|
EPIK
Member # 7481
|
posted
My car was originally an auto & I never swapped out the ecu, but I have never had the issue. I am also running a C&L & have never had any issues with that either...
|
Bigjerry916
Member # 8787
|
posted
my car does the same shit sometimes started after I put the C&L meter
|
Bigjerry916
Member # 8787
|
posted
quote: Originally posted by 50 Deep: i will give it a shot tonight and see what happens. sounds like it could work. i have heard though that cars with auto computers and the 5 speed swap will have this problem
hmm LMK what the problem was cause my 50 was orginally a auto i did a 5pd swap but still running the auto ecu
|
50 Deep
Member # 6216
|
posted
fixed it. set screw on the throttle blade was too far closed for the cam. After doing it i realize that i had done it before but didnt know the proper name. quick fix.
who wants to race now?
|
jaejae
Member # 7958
|
posted
quote: Originally posted by 50 Deep: fixed it. set screw on the throttle blade was too far closed for the cam. After doing it i realize that i had done it before but didnt know the proper name. quick fix.
who wants to race now?
race reggie
|
50 Deep
Member # 6216
|
posted
quote: Originally posted by jaejae: quote: Originally posted by 50 Deep: fixed it. set screw on the throttle blade was too far closed for the cam. After doing it i realize that i had done it before but didnt know the proper name. quick fix.
who wants to race now?
race reggie
Yeah....... tell that man to take off 2 of his plug wires and we got a deal. Or that little whistly thing.... how is he liking that torque arm?
|
jaejae
Member # 7958
|
posted
quote: Originally posted by 50 Deep: quote: Originally posted by jaejae: quote: Originally posted by 50 Deep: fixed it. set screw on the throttle blade was too far closed for the cam. After doing it i realize that i had done it before but didnt know the proper name. quick fix.
who wants to race now?
race reggie
Yeah....... tell that man to take off 2 of his plug wires and we got a deal. Or that little whistly thing.... how is he liking that torque arm?
lol take off the whistly thing..haha..his car is alot more stable now..deff tell a diff
|