T O P I C R E V I E W
|
RonaldDregan
Member # 9587
|
posted
I just put together a 302 with a cam, lifters, rockers, rollers, upper and lower cobra intake, alum heads, bbk fuel rails, 19lb injectors, 65 mm throttle body, fuel pressure regulator...ok thats enough for now. The car sounds great, but when I accelerate, the car misfires..I have been told that there isnt enough fuel getting to the motor. I have 24 lb injectors waiting to be installed, but the problem is, I have looked everywhere for a reputable shop to do the installation, as well as tune it..someone please point me in the right direction.
|
50 Deep
Member # 6216
|
posted
whats your adjustable regulator set at with the vacuum line off engine on?
|
JohnB
Member # 969
|
posted
If you want to bring it by, I'm in Fairfield as well. Send me a pm if interested.
|
92stangLX
Member # 3252
|
posted
quote: Originally posted by 50 Deep: whats your adjustable regulator set at with the vacuum line off engine on?
+1 check fuel pressure. Also, what pump are you running? Hopefully not the stock one
24lb fuel injectors would be better on that combo. You will need a matching MAF.
Also, consider upgrading your ignition system.
|
turbo50
Member # 6700
|
posted
what plugs and what are they gapped at?
|
RonaldDregan
Member # 9587
|
posted
The adjuster is set at stock, which is about 40 psi I think...I had the 24lb injectors in first, but the car wouldnt start so i put the 19s back in...it is the stock pump for now and an upgraded mass air meter. Honestly, I haven't been able to find a good shop since I moved to Fairfield, So I am really tempted to sell it and cut my losses!
|
Duncan Motors
Member # 7045
|
posted
i dont know what is considered good shop? but im in vallejo and know a thing or to on these cars,s. and john b is in faifeild also, so i wouldnt give up hope just yet. 707 554 4988 is the number to my shop.
|
JohnB
Member # 969
|
posted
Check the pin connectors for the FI harness. Sounds like they are either VERY dirty or not fully connected/seated. A car will start with nearly any fuel injector in it; injectors aren't the issue....wiring is.
|
RonaldDregan
Member # 9587
|
posted
I just got a fuel pressure gauge installed and increased it to 45psi..the car runs alot better, but it still needs work. Thanks for the advice, I will try and drop by the shop when I have time..
|
svt_etr
Member # 9616
|
posted
wish there was a good shop close to me in san jose.
good luck fixing your car!
|