|
Author
|
Topic: Cylinder head question
|
cflores
¯
Member # 7319
|
posted
 
 
So then I was wondering if anyone on here knew the part number for ARP rocker studs that I can use on a set of performers heads???
Posts: 85 | From: sacramento | Registered: Dec 2006
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
What size and type of rockers?
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
cflores
¯
Member # 7319
|
posted
here are the actual rockers from summit, SUM-G6942B, the heads are the edelbrock performers 1.90/1.60. the casting number is 6025 but they are the 1.90's I measured out the intake valve. thanks again.
Posts: 85 | From: sacramento | Registered: Dec 2006
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
It will be a 3/8 x 3/8" stud, just depends on what you're running for a guideplate. Most likely you'll need a 2.250 or longer setup.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
cflores
¯
Member # 7319
|
posted
coo thanks john.
Posts: 85 | From: sacramento | Registered: Dec 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
