T O P I C R E V I E W
|
Stock-ish
Member # 9244
|
posted
I have an 90 Hatch mustang and i wanted to make it carburated. I already have,
Air Gap Manifold Holley double pumper Ignition box from carb'd car
What Else Is Needed To do it? [ November 20, 2009, 02:16 PM: Message edited by: 4.94919 Liter ]
|
turbo50
Member # 6700
|
posted
a good smog guy if it isnt a track only car lol.
different dist and pump or regulate the efi pump down.
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by turbo50: a good smog guy if it isnt a track only car lol.
different dist and pump or regulate the efi pump down.
an good luck on that
|
Stock-ish
Member # 9244
|
posted
What about the wiring harness? Or will the ign box connect to the other harness?
|
fasthatch
Member # 7277
|
posted
what is the reson why you want to do this swap
|
Stock-ish
Member # 9244
|
posted
I perfer carbed cars. I don't know much about fuel inj cars. Plus I already have the parts to run what I wanna do with it. Otherwise I would have to buy the manifold and all the other supporting mods to run what I want.
|
wilit
Member # 3367
|
posted
"A carburetor is an incredibly ingenious and complex device for providing the wrong air-fuel ratio under all conditions of load and speed."
What is there you need to know about EFI? I can't wait to get rid of the carb on my car and run an EFI system.
|
707vibrantcobra93
Member # 4702
|
posted
With the rite carb and application u have near limitless tunability at your fingertips, it's all what u want to do with your car
|
Stock-ish
Member # 9244
|
posted
My first car was a carb, my dads car is a carb, all i have worked on is carbed cars, so i wanna stick to the carb. plus if i wanna throw a 347 in my car i already have the carb and manifold to do it. but in a fuel inj car id need to buy a new manifold, Throttle body, injectors and who knows what else?(not me) Plus pay to have it tuned right?
So anyone know if ill have to change the harness? Or can i wire in a msd box into the stock harness and run a carb?
|
707vibrantcobra93
Member # 4702
|
posted
Your going to have to change distributor and coil and wire the msd box acordingly if bought new the box will come with wiring for efi or carb ignitions if not you can get the diagram off the internet
|
70mach351
Member # 7528
|
posted
I yanked my harness and put a painless pro street in mine
|
warhorse58gt
Member # 7702
|
posted
the easiest way is.... msd box & dizzy, after market pump & reg... power to the pump ...power to the msd box.... and you have a running car.. no need to cut or remove and wiring..
|
Stock-ish
Member # 9244
|
posted
Thanks for all the info guys
|
JohnB
Member # 969
|
posted
quote: Originally posted by 707vibrantcobra93: With the rite carb and application u have near limitless tunability at your fingertips, it's all what u want to do with your car
Yup...and with FI it's all at the press of a button on a laptop.
|