|
Author
|
Topic: Got a tune today..Dyno Graph and Air fuel ratio inside!
|
gq916
¯
Member # 8540
|
posted
 
 
so i got a tune back in June, my motor mounts were bad so the guy couldnt get everything out of the car. I made 320rwhp back then. Since then I have new motor mounts and a fluid dampner crankshaft pulley and power streering pulley. I made 337rwhp today with perfect weather conditions. I know its a little high, even 320 last time was high. Check out the graph and air fuel ratio and let me know what you guys think. No torque and rpm reading. But he went all the way to 7200 rpm.
I have full exhaust, intake, short runner, IMRC delete, fluid dampner crankshaft pulley.
The lower line on the graph is my tune from last time and the line on top is from today !!
[ October 10, 2009, 03:00 AM: Message edited by: gq916 ]
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
93ReefBlue5.0
¯
Member # 5780
|
posted
not bad... what does your exhaust consist of? time to throw some cams/ported heads in the mix and make MORE POWER!!... lol...
Posts: 1535 | From: Sacramento, CA | Registered: Jun 2005
| :
|
|
gq916
¯
Member # 8540
|
posted
quote:
Originally posted by 93ReefBlue5.0:
not bad... what does your exhaust consist of? time to throw some cams/ported heads in the mix and make MORE POWER!!... lol...
bassani midlengths, bassani off road X, slp loud mouth II..
[ October 10, 2009, 04:50 AM: Message edited by: gq916 ]
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
*EPIK*
¯
Member # 7481
|
posted
Congrats, nice numbers. They do seem a tad on the high side, because I have never seen a car with b heads put down anything close to that with so few mods, but great numbers nonetheless..
It seems that on FFP's dyno some cars make way more power than they should, & others make less than they should ![[Confused]](confused.gif) I still remember the Mach 1 that supposedly made 350rwhp with nothing but a K&N, O/R exhaust, & electric water pump ![[BS flag]](graemlins/bs_flag.gif)
[ October 10, 2009, 12:09 PM: Message edited by: EPIK ]
--------------------
=91 Notch:12.31@110 **Under Construction**
=05 CTS-V: 418rwhp/393rwtq=13.01@111
http://www.djepikmusic.com
Posts: 6966 | From: 916 | Registered: Mar 2007
| :
|
|
|
|
Boss 327
¯
Member # 9143
|
posted
quote:
Originally posted by EPIK:
Congrats, nice numbers. They do seem a tad on the high side, because I have never seen a car with b heads put down anything close to that with so few mods, but great numbers nonetheless..
It seems that on FFP's dyno some cars make way more power than they should, & others make less than they should I still remember the Mach 1 that supposedly made 350rwhp with nothing but a K&N, O/R exhaust, & electric water pump
how hard was it to install the electric water pump?
--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
*EPIK*
¯
Member # 7481
|
posted
quote:
Originally posted by g-ride14:
quote:
Originally posted by EPIK:
Congrats, nice numbers. They do seem a tad on the high side, because I have never seen a car with b heads put down anything close to that with so few mods, but great numbers nonetheless..
It seems that on FFP's dyno some cars make way more power than they should, & others make less than they should I still remember the Mach 1 that supposedly made 350rwhp with nothing but a K&N, O/R exhaust, & electric water pump
how hard was it to install the electric water pump?
I don't have 1, but I was referring to another Mach that got dynotuned at ffp that was running an electric water pump...
[ October 10, 2009, 03:02 PM: Message edited by: EPIK ]
--------------------
=91 Notch:12.31@110 **Under Construction**
=05 CTS-V: 418rwhp/393rwtq=13.01@111
http://www.djepikmusic.com
Posts: 6966 | From: 916 | Registered: Mar 2007
| :
|
|
Boss 327
¯
Member # 9143
|
posted
o
--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
Boss 327
¯
Member # 9143
|
posted
gq916: who did the short runner for you? how much did it cost?
--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Good numbers bro. im hoping my fox puts down someting near that.
The numbers do seem a little high however. Looking at those readings if you got 337 to the wheel you should have around 380-400 at the crank. The tune and your bolt ons gave you a 100hp over the stock setup. If the numbers are right then thats pretty bad ass.
--------------------
Signature Wheel Ford Representative
Email: Terrance@Signaturewheel.com
Instagram: @Signature_Wheel_Mustang
Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
gq916
¯
Member # 8540
|
posted
quote:
Originally posted by g-ride14:
gq916: who did the short runner for you? how much did it cost?
NA SVT from svtperformance.com did the intake for around 500
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
Boss 327
¯
Member # 9143
|
posted
did he do good work? im talking to him about doing one for me
--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
gq916
¯
Member # 8540
|
posted
quote:
Originally posted by g-ride14:
did he do good work? im talking to him about doing one for me
yes, excellent work and in a timely manner.
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
RED@7kVERT *8850GT*
¯
Member # 5909
|
posted
it has a short runner. numbers are legit.
--------------------
2016 Mustang GT PP- Don't care lol
_ _____________ _
Sold:02 Z06-11.0 @ 132
Sold:05 CTS-V-13.1 @ 114
Sold:01 Cobra Vert-12.0 @ 119
Posts: 2432 | From: -916- | Registered: Aug 2005
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
50+ rwhp over a stock car...from a tune, intake, pulleys, and exhaust? These cars were lucky to make 280 in stock form.
You should go buy a lotto ticket.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
gq916
¯
Member # 8540
|
posted
These are my power adders
JLT RAI, 03 Cobra MAF, March fluid dampner, ps pulley
Bassani Midlengths & O/R X pipe, SLP LM II exhuast
Short Runner, IMRC delete
I'm going to AED for a dyno one of these days to see what it puts out on their dyno. I'll post graphs when i do.
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
gq916
¯
Member # 8540
|
posted
quote:
Originally posted by JohnB:
50+ rwhp over a stock car...from a tune, intake, pulleys, and exhaust? These cars were lucky to make 280 in stock form.
You should go buy a lotto ticket.
lol
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by gq916:
These are my power adders
JLT RAI, 03 Cobra MAF, March fluid dampner, ps pulley
Bassani Midlengths & O/R X pipe, SLP LM II exhuast
Short Runner, IMRC delete
I'm going to AED for a dyno one of these days to see what it puts out on their dyno. I'll post graphs when i do.
$25 for one pull with A/F.
BTW, we just had a 10psi 03 Cobra setup put down 399RW through an auto.
On FFP's dyno with a high compression shortblock & 8psi he got 480RW out of the same car. LOL
My own car on FFP's dyno put down 507RW thru a C4....ran 10.1 in the 1/4.
Added 2psi & swapped to a TH400.....put down 686RW on my dyno & ran 9.9 in the 1/4.
Our Shingle Springs dyno is calibrated within 1/2% of our San Jose Dynojet 224.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
gq916
¯
Member # 8540
|
posted
quote:
Originally posted by 93PONY:
quote:
Originally posted by gq916:
These are my power adders
JLT RAI, 03 Cobra MAF, March fluid dampner, ps pulley
Bassani Midlengths & O/R X pipe, SLP LM II exhuast
Short Runner, IMRC delete
I'm going to AED for a dyno one of these days to see what it puts out on their dyno. I'll post graphs when i do.
$25 for one pull with A/F.
BTW, we just had a 10psi 03 Cobra setup put down 399RW through an auto.
On FFP's dyno with a high compression shortblock & 8psi he got 480RW out of the same car. LOL
My own car on FFP's dyno put down 507RW thru a C4....ran 10.1 in the 1/4.
Added 2psi & swapped to a TH400.....put down 686RW on my dyno & ran 9.9 in the 1/4.
Our Shingle Springs dyno is calibrated within 1/2% of our San Jose Dynojet 224.
your in shingle springs right? when can i come in?
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
nine
¯
Member # 6732
|
posted
337 rwhp yeah... ![[Roll Eyes]](rolleyes.gif)
Posts: 40 | Registered: Apr 2006
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
seems very very high imo.but as long as it runs good its just a number.
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
O i see its a dyno dynamics,those can be setup to read very very happy.there is one in my town thats about 50 whp happy compared to our dynojet at our shop.
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
Bigchelis
¯
Member # 5941
|
posted
quote:
Originally posted by gq916:
These are my power adders
JLT RAI, 03 Cobra MAF, March fluid dampner, ps pulley
Bassani Midlengths & O/R X pipe, SLP LM II exhuast
Short Runner, IMRC delete
I'm going to AED for a dyno one of these days to see what it puts out on their dyno. I'll post graphs when i do.
That is a ton of N/A power with just bolt-ons.
My 2001 Cobra with Longtube BBK, BBK catted H-pipe, and Borla cat back did 292RWHP at Apex back when Byron was there.
Later I installed Foxlake Racing heads 305 CFM intake and 240ish exaust at .5 or .6in lift can't remember and had them install ModMax Cams too. It was $1600 in cams and $3k in heads back in 2002. Anyhow with the addition of those items and bbk cold-air, 65mm twin TTB, and JLT it did 337RWHP and 290RWTQ with Byron.
FYI: I wouldn't get heads or cams on a 4v Cobra again..ever ever ever.
Foxlake sent me 3 set of ported heads over 16 month period because they kept over porting and I would leak coolant out of the exaust. At the end the 3rd set didn't leak, but after about a week my shortblock died..
Then I spent 3yrs with Powerheads Longblock 302 that got replaced twice with while re-using the same Fox lake heads. Ralph at Powerheads assembled the entire longblock and twice it worked like crap and ran like it too. It did 348RWHP 330RWTQ, but it wasn't something dependable and the heads made a rattle noise..After changing all the timing chains and tensioners and 3yrs I gave up and the 10k longblock never worked as it should have. In the end it wouldn't even start. Ralph told me other people were making 400RWHP with the same longblock, so I don't know what went wrong with mine.
IMHO: 4V heads flow great in stock form, just put some boost and save yourself. You should invest your money in bost and a Tremec or C4.
bigC
[ October 14, 2009, 04:17 PM: Message edited by: Bigchelis ]
Posts: 161 | From: San Jose,Ca | Registered: Aug 2005
| :
|
|
gq916
¯
Member # 8540
|
posted
I went to AED today and got a dyno. Graph is in newer tread. check it out
--------------------
Zinc Yellow 2003 Mach1
Maximum Motorsport Suspension
White 1996 Cobra-Sold 3/2013
Tuned by ForceFed
AED Dyno 308rwhp 283rwtq SAE
Posts: 306 | From: sacramento | Registered: Jul 2008
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
![[patriot]](graemlins/patriot.gif)
