|
Author
|
Topic: center caps dont fit my 95 spindle
|
manow92
¯
Member # 9078
|
posted
 
 
i have a 92 with 95 spindles,x2 steeda ball joints and saleen 9inch replicas,and 13"bear breaks.the weeles fit but the center cap wont fit becouse of the dust caps.i have spacers and that works eccept the weele studs are to short.any one know how to get longer studs and any sugestions on what brand of bumpsteer kit i should go with?Any help would be so helpfull ,ive seached the net for days.....nothing
--------------------
Dan Caton
Posts: 14 | From: redding, california | Registered: Apr 2009
| :
|
|
LETHL 03
¯
Member # 5401
|
posted
shave some of the inside of the cap.
--------------------
RIP Willie Guzman LQ9SN95
Hard Head Muscle
#HHM #babydickcobra #lethl03
Posts: 4128 | From: 702 HHM | Registered: Feb 2005
| :
|
|
ratfast
¯
Member # 8720
|
posted
The '95 bearing should be sealed. Remove the dust cap and see if the center cap and wheel fit. If it does you can either leave it off (The center cap and wheel bolted tightly to the hub will keep crap off the bearing) or pound the dust cap down with a hammer around the nut and the threads on the spindle.
--------------------
'93 White notch all stock
Posts: 604 | From: roseville, california | Registered: Oct 2008
| :
|
|
FordRyderz510
¯
Member # 6771
|
posted
quote:
Originally posted by ratfast:
pound the dust cap down with a hammer around the nut and the threads on the spindle.
+1. Did the same thing and took care of my problem.
--------------------
Ford Ryderz -Est. 2003
88' GT
96' GT
97' Saleen #17
94' GT-Sold
Posts: 1894 | From: Hayward | Registered: May 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
