|
Author
|
Topic: Steel braided tranny lines
|
Jonny421Blaze
¯
Member # 9303
|
posted
 
 
I have a '88 GT. I want to change the hard tranny lines to PTFE Braided Stainless Steel Lines. Are these good lines? The second question is what is the fitting sizes for the Tranny and Radiator? Thanks for your help.
--------------------
Rebuilt '88 302. E303, BBK Cold Air, 70mm MAF, 70mm BBK TB, TF heads, Shorty BBK headers, Cobra Manifold, 19lbs. inj, M2300K brake kit.
Posts: 33 | From: East Bay | Registered: Jul 2009
| :
|
|
Jonny421Blaze
¯
Member # 9303
|
posted
I also need to know the size of the lines to use. Would the 6 AN be the correct size?
--------------------
Rebuilt '88 302. E303, BBK Cold Air, 70mm MAF, 70mm BBK TB, TF heads, Shorty BBK headers, Cobra Manifold, 19lbs. inj, M2300K brake kit.
Posts: 33 | From: East Bay | Registered: Jul 2009
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
6 is correct. not sure what the fittings, are but pull yours out, and run to a performance shop and match them up. but normally an lines are race car stuff that also dont run the stock cooler
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
