|
Author
|
Topic: firing order
|
STANGBOY
¯
Member # 7868
|
posted
 
 
whats the firing order on a 1988 mustang 5.0 auto or is it the same as a 5 speed,or is it difrent form a 90 and up cause we were checking it and its difrent from my bros 90 and my 88
--------------------
1986 mustang notchback
she's good from far but far from good
Posts: 2510 | From: SAN JOSE | Registered: Aug 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
all HO motors have the same firing order. no difference in firig order, manuel or auto.
--------------------
It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
Jeff S
¯
Member # 371
|
posted
13726548
--------------------
'90 Mustang LX: 8.53 @ 157.92 w/ 1.33 60' on DR's
'10 ZR1: FOR SALE
'14 E63 S: RENNtech ECU
'04 Gallardo: UGR TTG
Posts: 2121 | From: San Jose, CA | Registered: Aug 2001
| :
|
|
STANGBOY
¯
Member # 7868
|
posted
ttt
[ August 25, 2009, 07:19 PM: Message edited by: STANGBOY ]
--------------------
1986 mustang notchback
she's good from far but far from good
Posts: 2510 | From: SAN JOSE | Registered: Aug 2007
| :
|
|
166 Merlo
FELONY
MOTORSPORTS
Member # 1549
|
posted
the car would pop and not run correctly at all if you had the wrong firing order, if you have the non h.o firing order and it runs fine, then that means you have a non h.o cam.
--------------------
'89 - Boss Coupe
'70 - Drop Cutthang
'68 - Cougnut
'87 - 0166, Its real
Posts: 3954 | From: Thebay | Registered: Jul 2002
| :
|
|
Blue92
¯
Member # 8789
|
posted
quote:
Originally posted by Jeff S:
13726548
+1
Posts: 2906 | Registered: Dec 2008
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by 166 Merlot:
the car would pop and not run correctly at all if you had the wrong firing order, if you have the non h.o firing order and it runs fine, then that means you have a non h.o cam.
I have had a 1988 5.0 5 speed car with a non ho cam in it the motor was removed from a 1990 bronco and I moved the plug wires around to make up for it.
The check engine light was always on and it always had a low idle stumble and a small stumble when stepping on the gas.
My next move would have been to move the injector harness around and I am 100% sure that would have fixed it but I sold it and the guy put a stroker motor in it....so...
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
