T O P I C R E V I E W
|
Sic Wit it 50
Member # 4119
|
posted
n the back of the heads since i have no smog stuff on the car its all removed do i need to plug the holes n the back of the heads if so with wat silicone gasket maker or??????
|
jaejae
Member # 7958
|
posted
yea you need a bocking plate of some sort
|
blkfoxbody89
Member # 8361
|
posted
I found a couple bolts that were short and barely slid in, then covered them in gasket maker stuck em in and let them set over night. I was good to go for a year. but I would not recommend it. get a plate like people say.
|
HaulinAss Motorsports
Member # 541
|
posted
You need to obtain accessory bolt hole plugs. They are a threaded plug about 3/4" in length. Any Engine Machine Shop or Head Manufacturer will have them
|
nitrous_bob
Member # 77
|
posted
the real way is the thermactor plugs... it's a "threaded insert" i used to have the part number
the ghetto way is to just cut the "y" pipe that wa son there... flip them over, use on the opposite head... get some rtv in the hole, then bolt them back on
no one can see it so no big deal really
|
Sic Wit it 50
Member # 4119
|
posted
okay found the thermactor plugs but wat about the bigger holes wats gunna go i n those
|