T O P I C R E V I E W
|
916 ceez
Member # 8841
|
posted
will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
|
jordan_0806
Member # 5888
|
posted
quote: Originally posted by 916 ceez: will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
you'll need a bell housing from a 94/95; fox one wont work...
|
91fox
Member # 7842
|
posted
you will need a fox bell and a 85-93 input shaft because the 94-95 input is longer
|
91fox
Member # 7842
|
posted
85-93 input will work but try and use a 90-93 input because they are a little stronger
|
gercolla1
Member # 3068
|
posted
or just have a shop cut ur drive shaft down
|
BlowN67
Member # 4229
|
posted
quote: Originally posted by jordan_0806: quote: Originally posted by 916 ceez: will a t5 from a 95 cobra fit my 93 x chp or what do i have to change on it. manual
you'll need a bell housing from a 94/95; fox one wont work...
100% correct an the other three are wrong beside the input yes is longer so thats why u need to run the 94/95 bell. . also u can run a fox tranny in a sn95 if u use the fox bell housing seen it first hand [ July 25, 2009, 02:32 PM: Message edited by: BlowN67 ]
|
91fox
Member # 7842
|
posted
well it would work but it would also place the trans tail further back and you could cram the driveshaft yolk too far into the tail shaft. but that is a worst case scenario. changing out the input and bell is not hard and will assure you a problem free fox style T5.
|