This is topic Supercharger help.... in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=020479

---

Posted by VTec This (Member # 4268) on :
 
I have a Procharger p600B complete kit made for a 96-98 GT. I'm trying to put it on my 03 GT. Does anyone know if I buy the P1sc bracket, if I can drill holes to make it fit the p600B supercharger and bolt up to my 03?

I also talked to a couple people and they said I can swap the timing cover case on the 96 GT and put it on the 03 GT and then the blower will bolt right up. What's all involved in swapping the timing cover case between the two years? Is it a pain in the ass?

Thanks
John
 

---

Posted by JohnB (Member # 969) on :
 
You can't drill holes in the bracket; the routing for the belt is completely different.

Pull/swap the timing covers.
Remove the valve covers, harmonic balancer, PS pump reservoir, hydroboost pump, AC pump, coil brackets, fan for radiator. Cover bolts, 4 bolts from oil pan to cover, reverse the install...pretty straight forward, just don't mess with the chain tensioners.

Or, make a template of the bracket you need and have it made from plate aluminum.
 

---

Posted by VTec This (Member # 4268) on :
 
The template sounds a lot less of a headache, I'm flooded with school and work and only have part of the weekends to work on the car.

Any idea on how to make a template and how much it would cost?
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com