T O P I C R E V I E W
|
91silverbullet
Member # 8668
|
posted
the block I got is a 72 block..so is a 2 piece seal..will this give me a problem down the line..or how can I extra seal it ..meaning wut can I do to the seal for it to work like a one piece..thanks in advance for the help
|
8stang8
Member # 8082
|
posted
I had trouble w/ a mexican block that i used to run same shit like the 289 hi-po... It leacked on me w/ three seals i put in that thing .
The forth one ddnt leak i put it flush w both the cap and the block... some ppl have one side of the seal 3/8ths above both the block and cap THAT NEVER WORKED FOR ME!
If i remeber it was a felpro product and it wasnt the regular black seal it was a orange red color made of a better material.
Hope that hellps
|
91silverbullet
Member # 8668
|
posted
Yea thas wut I heard ..use the 3/16 seal and put it kinda sideways..so that way it won't leak...but I guess imma juss go wit mounting it flush..thanks bro
|
F.or O.nly R.eal D.rivers
Member # 8971
|
posted
Ive seen them leak through the main cap itself where it mates to the block,I usually rub a LITTLE bit of silicone on the face of the main cap where it mounts onto the block,and do like you said offset the seal when you put it in.I put a small dab of silicone where the seal mate also.Dont forget the seal is supposed to go in a certain way too.
|
91silverbullet
Member # 8668
|
posted
Rite on gabe..this felipe I met u at the dyno day..but yea .imma get to the seal this weekend ..rite on for the pointers..
|