T O P I C R E V I E W
|
Bigjerry916
Member # 8787
|
posted
What electric fan controllers are you guys using for your dual fan set ups?? I am putting a dual dodge intrepid fan set up into my fox and looking for a fan controller. The fan has one ground and 2 positives one for the low feature and one high feature. I would like this fan to be all powerd by its on I am not down with 80 switches to activate to get things going plus I'm hella forgetfull. I found this DIF dual electric fan controller that I could set the temperatures for each fan (selling for bout 125). Does anybody know if this product is crap?? If it is what are some recomendations?? Also I don't want to ditch the fan I have its a perfect fit and really slim and I like the dual fan feature.
|
92stangLX
Member # 3252
|
posted
Painless makes a good one. Get one with the thermostat that goes into the thermostat housing.
|
87coupe510
Member # 6150
|
posted
+1 On the Painless
|
Blind
Member # 3052
|
posted
I made my own for about $20, autometer warning light sending unit for water temp, drilled and tapped my thermostat housing, I use that as the "Switch" going to a relay that triggers the high speed on my mark8 fan.
|
John91coupe
Member # 18
|
posted
Delta Control. http://www.dccontrol.com/0820.htm
I use 2 of them. One for the fan and one for the electric water pump.
[ January 20, 2009, 12:06 PM: Message edited by: John91coupe ]
|
Bigjerry916
Member # 8787
|
posted
How are you like n that controller, I recently started talking with brian and I'm kinda diggin there controllers.
|
John91coupe
Member # 18
|
posted
quote: Originally posted by Bigjerry916: How are you like n that controller, I recently started talking with brian and I'm kinda diggin there controllers.
They work flawlessly. You have complete control over the engine temperature. One of the best buys on the market.
|
Bigjerry916
Member # 8787
|
posted
from what he told me they work on a 0 2 100% speed and sets its temperature based on the engine heat. is there a manual override feature? how long have you been using there controllers.
|
John91coupe
Member # 18
|
posted
quote: Originally posted by Bigjerry916: from what he told me they work on a 0 2 100% speed and sets its temperature based on the engine heat. is there a manual override feature? how long have you been using there controllers.
Not that I know of but Brian shoud be able to tell you better. I have had mine for a long time, maybe 4 years?
|
351mclaren
Member # 2275
|
posted
John,
Price wise what did you have to give for the controller?
Norris
|
John91coupe
Member # 18
|
posted
As I remember they were around $140 each.
|
Bigjerry916
Member # 8787
|
posted
Thanks. Ill be ordering two prolly one for my stang and one for my datsun.
|