This is topic TORQUE Q'S AND LIFT Q'S in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=018155

---

Posted by 1991 SSP COUPE 331 TWIN TURBO (Member # 7840) on :
 
WHAT'S THE TORQUE SPECS FOR:
EDELBROCK HEADS?
1.7 ROLLERS?
EDELBROCK LOWER INTAKE?

AND WILL 1.7 ROLLERS WITH E303 CAM CLEAR STOCK VALVE COVERS?

Thanks
 

---

Posted by warhorse58gt (Member # 7702) on :
 
i got b-41 cam and 1.6rr's and i fit under stock covers. need to take the baffle off and do a little notching. nothing to it.
 

---

Posted by 1991 SSP COUPE 331 TWIN TURBO (Member # 7840) on :
 
Thanks
 

---

Posted by 1991 SSP COUPE 331 TWIN TURBO (Member # 7840) on :
 
Still need torque numbers please
 

---

Posted by Wings65288 (Member # 5901) on :
 
try calling the manufacturer
 

---

Posted by 1991 SSP COUPE 331 TWIN TURBO (Member # 7840) on :
 
TTT
 

---

Posted by Bronco Man (Member # 8401) on :
 
The manufacturer may not tell you. Buy a motors manual it tells you everything or darn near.
 

---

Posted by Bronco Man (Member # 8401) on :
 
Also try a trusted machine shop they will know.
 

---

Posted by asskickn88 (Member # 4957) on :
 
The head torque specs are based on the bolts your using, stock is like 55 ft lbs and I think ARP was around 70 ft lbs. If your using ARP bolts then you just use the chart they have with your bolt size. The intake should be done in a couple steps, work from the center bolts outward starting at 10 ft lbs then step up to 25 ft lbs. Its important to get them all set equal and make sure to go over them all a few times because as you tighten certain bolts the others will become loose. The rockers are 18-25 ft lbs if they are pedestal mount, be sure not to tighten them too much or you'll crack the pedestal.
 

---

Posted by 1991 SSP COUPE 331 TWIN TURBO (Member # 7840) on :
 
Using apr head bolts and intake bolts, and yes I'm using pedistal rockers
 

---

Posted by asskickn88 (Member # 4957) on :
 

quote:

---

Originally posted by 1991 SSP COUPE 331 TWIN TURBO:
Using apr head bolts and intake bolts, and yes I'm using pedistal rockers

---