|
Author
|
Topic: motor help
|
BlowN67
¯
Member # 4229
|
posted
 
 
well its time to start on the 351w. i pulled it out an notice very little if any surface rust on head surface an also notice some but not much in the water jackets an passages. will this be all ok for a rebuild or do i need to do something to it. was just going to crosshatch the cyl an put it together so any advice please
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
ProjectFox87
¯
Member # 7048
|
posted
From what I've seen, You should be fine man. Just clean it off. I wirewheeled a little rust off one of my miata motors, it did leave some small scratches, so i dont recommend it, but it worked. Im sure there are other ways, like steel wool. Goodluck.
--------------------
1987 MUSTANG 5.0.Sold 1990 MX-5 Turbo MIATA Sold 1990 Mustang 5.0. Sold 1992 Turbo Miata Sold
1991 240sx Sold 1991 Miata Turbo,WILL Spank your 5.0 =]
Posts: 510 | From: WEST SACRAMENTO | Registered: Sep 2006
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
You'll be fine. Spray everything down with WD40 and wipe off with a coarse rag (shop rag). If it won't come off, use 800 grit wetsand paper WITH a light mineral oil; clean everything up with brake parts cleaner.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
BlowN67
¯
Member # 4229
|
posted
i shouldnt be worried about the little rust in the jackets an passages right. seemsabout normal i would think, an thanx again for everything.
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Nope, don't sweat it. DO make sure all your freeze plugs are good while it's out...you don't wanna find out the hard way.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
BlowN67
¯
Member # 4229
|
posted
i got a new set of brass ones
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
Notch1320
Man Pedal
Member # 2647
|
posted
John,
Finishing one of those projects would minimize the rust that forms on everythng from sitting...
J/K man... what are you building the 351 to put in?
Posts: 2349 | From: Yuba City, CA | Registered: Mar 2003
| :
|
|
BlowN67
¯
Member # 4229
|
posted
just gathering parts any trying to get things together instead of all around the place
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
Fostang
¯
Member # 3752
|
posted
just buy my 385 and be done with it. No need to go out and find parts. ![[Smile]](smile.gif)
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3012 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
