|
Author
|
Topic: front struts and c/c plates on 96 cobra
|
Stangs R Us
¯
Member # 4495
|
posted
 
 
What's a good cheap front strut for a 96 cobra mustang
And caster camber plate
[ October 31, 2007, 01:18 PM: Message edited by: red GT black rallyes ]
Posts: 3100 | From: sacramento | Registered: Aug 2005
| :
|
|
BUKSING
¯
Member # 6594
|
posted
tokico blues(hp) or kyb gr2's
Posts: 1571 | From: 510 | Registered: Mar 2006
| :
|
|
Stangs R Us
¯
Member # 4495
|
posted
Coo thanks bro , what aboout some caster/camber plates I know MM makes a good one but is there a cheaper one that's just as good?
[ October 31, 2007, 01:16 PM: Message edited by: red GT black rallyes ]
Posts: 3100 | From: sacramento | Registered: Aug 2005
| :
|
|
BUKSING
¯
Member # 6594
|
posted
when i was shopping for cc plates i almost went with cheapos but i actually forked out $$$ to get mm cc's.... i really think they are the best...im glad i got them. i dont think anything else compares. get mm cc's. everyone else will also recomend them.
Posts: 1571 | From: 510 | Registered: Mar 2006
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
MM is the only way to go, most of them for sn95's don't use 4 mounting bolts even...
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Stangs R Us
¯
Member # 4495
|
posted
I been kinda looking around and I haven't found a good place to get the tokico blues and the mm plates , anyone know a cheap place???
Posts: 3100 | From: sacramento | Registered: Aug 2005
| :
|
|
HCI RACING
New Member
Member # 8009
|
posted
Maximum Motorsports is by far the best for all mustang suspension needs, MM caters to only mustangs, the welds and tubular steel they use is very beefy and lightweight. I put the pan hard bar, torque arm, frame rails, Bilstein shocks, with drag springs H&R 274 lbs. in the rear and adjustable lower control arms & of course the infamous caster camber plates which are adjustable in many more axis than others I have seen on the market. Please get in touch with me if you have any questions? I might have a set? Travis
--------------------
THANK YOU,
HCI RACING
Posts: 8 | From: HCI RACING | Registered: Nov 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
