|
Author
|
Topic: 1990 5.0 cam question
|
P.B.R .stangs
¯
Member # 6544
|
posted
 
 
I have a low mile lincoln lsc 5.0 short block.
I was looking for the best cam to go with gt-40 turbo swirl heads and 1.7 rockers without worring about piston to valve clerance issues. any thoughts?
--------------------
86 gt (parted out)
90 lincoln mark 7 (sold)
99 cobra (sold)
89 5.0 lx hatch (sold)
Posts: 167 | From: fair oaks/sacramento | Registered: Feb 2006
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
b cam
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
P.B.R .stangs
¯
Member # 6544
|
posted
whats evreyone take on the 5.0 crane cams
--------------------
86 gt (parted out)
90 lincoln mark 7 (sold)
99 cobra (sold)
89 5.0 lx hatch (sold)
Posts: 167 | From: fair oaks/sacramento | Registered: Feb 2006
| :
|
|
RED@7kVERT *8850GT*
¯
Member # 5909
|
posted
B cam w/ 1.7's is a GOOD combo!!
--------------------
2016 Mustang GT PP- Don't care lol
_ _____________ _
Sold:02 Z06-11.0 @ 132
Sold:05 CTS-V-13.1 @ 114
Sold:01 Cobra Vert-12.0 @ 119
Posts: 2432 | From: -916- | Registered: Aug 2005
| :
|
|
asskickn88
¯
Member # 4957
|
posted
quote:
Originally posted by RED@7kVERT *8850GT*:
B cam w/ 1.7's is a GOOD combo!!
Thats damn near an F cam if I remember right. ![[patriot]](graemlins/patriot.gif)
--------------------
Three 540 Bimmers and a 5.0 Explorer.... got a Ford back in the stable!
It's time for the country to do what Obama's own father did.
Abandon him.
Posts: 6069 | From: Rocklin, Ca | Registered: Oct 2004
| :
|
|
badazlx
¯
Member # 4899
|
posted
no its an x-cam
--------------------
03 mach bolt ons/125 shot
Posts: 911 | From: roseville | Registered: Sep 2004
| :
|
|
asskickn88
¯
Member # 4957
|
posted
quote:
Originally posted by ranger guy:
no its an x-cam
Ok, the B cam with 1.7's is .510 lift 224 duration at .050 and 112 lobe center. The F cam is .512 lift 226 duration and 114 lobe center. The X cam is 542 lift with 224 duration and 112 lobe center. So you end up with an X cam with just under an F cam lift. Now that I look at the F cam, it should make a good off the shelf blower cam.
--------------------
Three 540 Bimmers and a 5.0 Explorer.... got a Ford back in the stable!
It's time for the country to do what Obama's own father did.
Abandon him.
Posts: 6069 | From: Rocklin, Ca | Registered: Oct 2004
| :
|
|
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Trickflow stage 1.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
whats a e cam with 1.7's ![[Big Grin]](biggrin.gif) ....
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
|
|
speeddhb
¯
Member # 6593
|
posted
Yes, rocker arm ratio will change duration slighly, if the valve opens sooner because of the higher ratio rocker arms it is effectivly changing duration, not much but it does change. May be 1-2 degrees. And BTW saying that a certain rocker arm W/ certain cam makes it like another is like comparing apples to oranges!!! There are sooo many different lobe profiles out there that even if the lift is the same and even duration that you can have 2 very different cams. AND the LSC motor (I think) had a dish piston without valve reliefs, SO I think you can effectivly run about 510 lift. Remember that the wider the lobe seperation that usually means that you can not run as much lift! TIghter lobes you can (usually) get away with a little more lift. AND if this is in a LSC I would put a stock HO cam in it with 1.7's and call it a day!! More tourqe and it will be faster!! Please check with clay!!!!
ASE cert machinist 11+ years!!!!
[ October 02, 2007, 08:44 AM: Message edited by: speeddhb ]
--------------------
IT's fast, I have the 17sec time slip to prove it!
Posts: 250 | From: Rocklin | Registered: Mar 2006
| :
|
|
P.B.R .stangs
¯
Member # 6544
|
posted
would an f cam be to big with 1.7's and stock pistons?
--------------------
86 gt (parted out)
90 lincoln mark 7 (sold)
99 cobra (sold)
89 5.0 lx hatch (sold)
Posts: 167 | From: fair oaks/sacramento | Registered: Feb 2006
| :
|
|
P.B.R .stangs
¯
Member # 6544
|
posted
The lsc pistons have the same valve reliefs as a stock 87 up mustang 5-liter.
--------------------
86 gt (parted out)
90 lincoln mark 7 (sold)
99 cobra (sold)
89 5.0 lx hatch (sold)
Posts: 167 | From: fair oaks/sacramento | Registered: Feb 2006
| :
|
|
93mustang50
¯
Member # 6642
|
posted
i had a b cam with 1.72 rr and ported e7 heads in my 88, it made good power in the higher rpms, idled well and drove around town smoothly.
[ October 02, 2007, 02:21 PM: Message edited by: 93mustang50 ]
Posts: 213 | From: Vacaville | Registered: Mar 2006
| :
|
|
asskickn88
¯
Member # 4957
|
posted
quote:
Originally posted by Pure Stang:
whats a e cam with 1.7's ....
Just take the total lift, divide it by 1.6, take that number and multiply it by 1.7 and you have the new lift numbers.
E cam: .498 with 220 duration at .050
with 1.7's its a .529 lift and .535 with a 1.72 rocker.
--------------------
Three 540 Bimmers and a 5.0 Explorer.... got a Ford back in the stable!
It's time for the country to do what Obama's own father did.
Abandon him.
Posts: 6069 | From: Rocklin, Ca | Registered: Oct 2004
| :
|
|
LQ9SN95
¯
Member # 7080
|
posted
quote:
Originally posted by asskickn88:
quote:
Originally posted by Pure Stang:
whats a e cam with 1.7's ....
Just take the total lift, divide it by 1.6, take that number and multiply it by 1.7 and you have the new lift numbers.
E cam: .498 with 220 duration at .050
with 1.7's its a .529 lift and .535 with a 1.72 rocker.
i was pretty damn close
--------------------
http://www.fastgms-teamfast.com
http://www.facebook.com/aop.fresno?ref=ts&fref=ts
Lq9 swap
102 fast intake
Trick flow heads
T rex cam
Posts: 8031 | From: Fresno, Ca | Registered: Sep 2006
| :
|
|
|
|
P.B.R .stangs
¯
Member # 6544
|
posted
thanks for all the info, im going with the b-cam
--------------------
86 gt (parted out)
90 lincoln mark 7 (sold)
99 cobra (sold)
89 5.0 lx hatch (sold)
Posts: 167 | From: fair oaks/sacramento | Registered: Feb 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
