T O P I C R E V I E W
|
Eddie510-
Member # 2354
|
posted
OK...I Got A 94gt and my bud gave me a clutch off his 92 5.0 . I tried to put it on and the tranny will not go in properly,like a inch or lesser tried sevral times so i tried putting back the old one and it goes in FINE! So i buy a new one off some one here and still same thing... ive noticed something,pls check the pics out to see if you guys think this can be my problem!
People say that 86 to 95 the clutch kits will fit right? well i try puuting on a clutch disc and pressure plate from a 92 coupe and the tranny will not close in all the way , tried everything! so i put the old disc(clutch) from the sn95 and the tranny fitted. HERE are pics!
[ July 12, 2007, 04:08 AM: Message edited by: Eddie510- ]
|
Eddie510-
Member # 2354
|
posted
ttt
|
Eddie510-
Member # 2354
|
posted
or could it be the disk, god damn,fuck sn95's!
|
Eddie510-
Member # 2354
|
posted
well i took the tranny back off an took a look at the discs . I changed the discs on the tranny and the old disc(clutch) and put it in the shaft and and it has more space than the one of the FOX off a coupe. that would be the prob correct?
|
Eddie510-
Member # 2354
|
posted
quote: Originally posted by Eddie510-: well i took the tranny back off an took a look at the discs . I changed the discs on the tranny and the old disc(clutch) and put it in the shaft and and it has more space than the one of the FOX off a coupe. that would be the prob correct?
I put the tanrsmission back up with the old clutch disc in there and BAM it fitted its just weird since people say and on summit and everywhere else exept kragen says 86-95 is the same. Anyone have any opinion to this or had the same problem?????????? [ July 08, 2007, 09:59 PM: Message edited by: Eddie510- ]
|
Eddie510-
Member # 2354
|
posted
PLEASE SOMEONE TTT
|
Eddie510-
Member # 2354
|
posted
i dont think no one knows im talking about, i dont think im explaining my self correctly, im going to post some pics soon!
|
asskickn88
Member # 4957
|
posted
The disc should be the same, I used a stock 96 Cobra clutch in my 88 and it worked great. The only thing I can think of is maybe you have the disc out of alignment with the pilot bearing in the crank so the input shaft wont go all the way in.
|
Eddie510-
Member # 2354
|
posted
asskicken. look at it, see if you see a prob I need to get this car going, since shes driving my 88
|
Eddie510-
Member # 2354
|
posted
ttt
|
F8LSN8K
Member # 7080
|
posted
ttt for ya eddie, wish i knew, but beats me
|
Eddie510-
Member # 2354
|
posted
TTT
|
gt from 650
Member # 6717
|
posted
eddie.. did you ask laylo? he seems to know alot about fords.
or ask sheldon (big boy) fremont.
|
Eddie510-
Member # 2354
|
posted
no i diddnt , its just i never ran into this problem ever.ttttttttttttttttttttttttttt
|
Eddie510-
Member # 2354
|
posted
|
Eddie510-
Member # 2354
|
posted
YUP IT HAS TO BE THIS PROBLEM FOR SURE. I just tried it again tonight with the clutch from the 92. I tried it the eaiser way which was putting the houseing first and than the t5 and from the bellhousing to the t5 theres about less than an inch of space! I tried putting the bolts on and tighting it like that and nope, bolts almost stripped inside the housing! , so i take it off, and i put the old clutch disc and what do you know IT FITS! Im going to see some clutches at storees tomorrow and pic one out thats the same size as the old one, this shit sucks, it lookes like im not getting no help because no one ever ran into this problem. ive done lots of tranny/clutch swaps for friends and my self and this one is a bitch
|
F8LSN8K
Member # 7080
|
posted
|
Eddie510-
Member # 2354
|
posted
These are the numbers i found on the transmission: -4A BORGWARNER Automotive 13-52-066-939 13-52-065-939 F4ZR-7003-BA REP-BA A2143
|
BlowN67
Member # 4229
|
posted
sounds to me like a clutch aligment problem an not letting the input shaft go into the pilot bearing. like mentioned b4. I'm running a spec3 26 spline on my gt out of an cobra an dont have a problem with it. so i think its just an aligment problem. good luck. call some people over to help u out cause i know tranny can get heavy after being very frustrated with it. an to also have someones other opinion there too.
|
nine
Member # 6732
|
posted
The following companies use the same clutches/clutch discs for 86-95 5.0 Mustangs:
- Spec, http://specclutch.com/ - ACT, http://advancedclutch.com/ - Centerforce, http://centerforce.com/ - Ram, http://www.ramclutches.com/Applications/ford_1.htm
|