T O P I C R E V I E W
|
COBRAreflection
Member # 5247
|
posted
I have 331 w/ Holley systemax heads, and the Kenne Bell blower. Whats a good cam to go with? Someone recommended a X303 for my setup. What do the pros out there think?
|
Pure Stang
Member # 7251
|
posted
i would go with a custom cam... or comp cams.... the letter cams are old tech
|
HaulinAss Motorsports
Member # 541
|
posted
quote: Originally posted by Pure Stang: the letter cams are old tech
yet still work very well
|
rickm347
Member # 5323
|
posted
quote: Originally posted by Pure Stang: i would go with a custom cam... or comp cams.... the letter cams are old tech
+2. go with more of a blower cam. go with a cam thats closer to the same intake as the exhaust (lift). you can call up comp cams and tell them your set up. the custom cam is pretty close in price to a cam that you can just pick out of the magazine....--rick
|
court
Member # 6700
|
posted
I think you would be suprisingly happy with an x cam and im sure many custom cam builders would recommend it for an off the shelf application. [ May 14, 2007, 04:01 PM: Message edited by: court ]
|
rickm347
Member # 5323
|
posted
what size rockers do you have?? x is too big for 1.7s
|
COBRAreflection
Member # 5247
|
posted
I have 1.6's. I've heard the X cam and like the sound of it, but I also wanna make sure I get the most out of the blower.
|
95331StrimVert
Member # 6250
|
posted
The Cam depends on what you plan to do with the car. I have run both the E-303 and F-303 cam on my blown 331 with 1.6RRs. Surprisingly, the F-303 idles smoother then the e-303 and it makes more top end power, a lot more. It does give up a bit of low end torque, which is kind of a bummer for a street car. Anyway just my two cents...
|
Pure Stang
Member # 7251
|
posted
quote: Originally posted by COBRAreflection: I have 1.6's. I've heard the X cam and like the sound of it, but I also wanna make sure I get the most out of the blower.
a custom cam would get the most out of your blower... but if you got your mind set on the X go for it
|
COBRAreflection
Member # 5247
|
posted
quote: Originally posted by 95331StrimVert: The Cam depends on what you plan to do with the car. I have run both the E-303 and F-303 cam on my blown 331 with 1.6RRs. Surprisingly, the F-303 idles smoother then the e-303 and it makes more top end power, a lot more. It does give up a bit of low end torque, which is kind of a bummer for a street car. Anyway just my two cents...
That sounds tempting. This blower makes alot of low end torque, and it could benefit me losing some low end to gain better traction. But, how would the X compare in performance to the F? Not set on the X, but just wanna know if anyone has any input on it.
|
SmokinLX
Member # 1684
|
posted
Custom FTW & never look back! I have the F with 1.6's on an HCI 306 now and it work'd good and pull's hard to 6,500 rpm redline but the cam cam in the used shortblock I got so I did'nt have a chance to choose or it would of been custom for sure!
|
F8LSN8K
Member # 7080
|
posted
quote: Originally posted by HaulinAss Motorsports: quote: Originally posted by Pure Stang: the letter cams are old tech
yet still work very well
+1
|
COBRAreflection
Member # 5247
|
posted
Still undecided, but I appreciate everyones input.
|
91Trunkster
Member # 6598
|
posted
I choose an F-Cam for my boosted application, have yet to run it, so I can't comment but I've read and heard good things about the F-Cam and that helped influence my decision, my car is turbo not supercharged though.
|
RiverCityAuto
Member # 7664
|
posted
getting a X or F cam is always an option, but like with anything else on your car, when you can say " I have a custom cam " for one it sounds cooler and 2 it will most likely work better for you.....
|