|
Author
|
Topic: rear end gear question?
|
whitelx50
New Member
Member # 6512
|
posted
 
 
I have a 1990 5.0 with an auto. what are the stock gear ratio in the diff?
Thanks.
Posts: 8 | From: Roseville | Registered: Feb 2006
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
273's if they are stock.
--------------------
Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
turbo50
¯
Member # 6700
|
posted
you can look on the door tag....if the car hasnt been molested.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
BlowN67
¯
Member # 4229
|
posted
or mark the driveshaft an put a mark on the hub or wheel. an count hany time the driveshaft spins to one time around of the wheel.
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
It can be a 2:73,3:08 or even a 3:27 with that year and trans combination.There is no standard gear.You can check the tag on the rear cover which will have ratio as well.It is the numbers located right near the cover bolt,you MAY need to remove it to read it.
It will have a Number such as 2,3 etc...followed by 2 letters and then 2 more number.
So it can Look like this
Example: 2ld73
The ratio would be 2:73
Hope this helps!
Posts: 22509 | From: Sacramento | Registered: Nov 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
