T O P I C R E V I E W
|
PopTheHood
Member # 7040
|
posted
Who is around Vallejo Ca. that is good at tuning carbs, timing, ect... I just put a new motor in my car and i cant get it to run right. i need someone who knows what they are doing.. My car is backfiring back through the carb, staying on when I turn it off, the passanger side header is getting so hot that it melts sparkplug boots, its just a mess. Let me know if anyone can do it and how much $$ you want. Its a 331 if that makes a difference. [ December 22, 2006, 07:38 PM: Message edited by: PopTheHood ]
|
90lxfoxbody
Member # 6947
|
posted
Well im not in the area but if your willing to make a drive im sure are shop can take care of it for you or atleast show you what the problem is...We are located in fresno area....
are number is 559 579 2586 and ask for nathan.Im the tuner there and we do everything from l.s.1 to fox bodys to carbed or hondas....
|
AJBlackGT
Member # 3936
|
posted
Only a 5 hour drive
|
90lxfoxbody
Member # 6947
|
posted
sorry just threw it out there if nothing else was out there...We do good work and sometimes its worth the drive...
|
PWR HNGRY 302
Member # 6000
|
posted
I'll fix it for you Erich . Its an easy fix we'll just trade motors and in the blink of an eye all your problems will be fixed.
|
1FAST89GT
Member # 5071
|
posted
pm sent
|
Motorhead6T5
Member # 4969
|
posted
Sounds like your timing is retarded too much. Big cams like a lot of base timing.
Also sounds like you got some run on. Did you hook up a msd or change the ignition at all? [ December 23, 2006, 04:53 AM: Message edited by: Motorhead6T5 ]
|
dynoguy
Member # 6457
|
posted
Hey PoptheHood,
Lets start at the begining and double check the firing order. First make sure that you are on tdc then go through the firing order. Be advised that some camshafts change the firingorder. Your engine builder or cam company should be able to tell you if it is different than stock.
When you are sure that is ok recheck your base timing.
Hope this helps. If you still need help we are just over the bridge from you next to the Concord airport. [ December 24, 2006, 12:12 AM: Message edited by: dynoguy ]
|