|
Author
|
Topic: Tranny , pops when going into fifth gear
|
adower
¯
Member # 5955
|
posted
 
 
Just noticed recently that whenever I try to shift into fifth gear above 2500 rpm I get a pop \ grinding sound. However, it still goes into gear without any trouble. If I shift into fifth at any other rpm there is no noise. Is my fifth gear syncro going out? This is a T-5
It is pretty much the same pop noise as you get when putting a t-5 into reverse.
[ November 07, 2006, 05:09 PM: Message edited by: adower ]
--------------------
98 Cobra
Griggs
S Trim
HRE
Posts: 3327 | Registered: Aug 2005
| :
|
|
CMELEVU
¯
Member # 2563
|
posted
sounds like you might want to start saving up for a new transmission
Posts: 201 | From: Marysville | Registered: Mar 2003
| :
|
|
adower
¯
Member # 5955
|
posted
Even if all the other gears work fine? What about a rebuild?
--------------------
98 Cobra
Griggs
S Trim
HRE
Posts: 3327 | Registered: Aug 2005
| :
|
|
losbadgts
¯
Member # 4394
|
posted
i would start by changing the tranny fluid and the 5th gear syncro. and if u still have a problem after that then rebuilt or new tranny
--------------------
Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
adower
¯
Member # 5955
|
posted
Thanks for the advice. If I shift into fifth under 2500 rpm there isnt any grind/pop. Ive got an aftermarket shifter if anyone was wondering btw.
--------------------
98 Cobra
Griggs
S Trim
HRE
Posts: 3327 | Registered: Aug 2005
| :
|
|
losbadgts
¯
Member # 4394
|
posted
can u adjust the shifts on the shifter? if so try re adjusting the shifter first.
--------------------
Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
adower
¯
Member # 5955
|
posted
Yah it has screws you can adjust
--------------------
98 Cobra
Griggs
S Trim
HRE
Posts: 3327 | Registered: Aug 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
