This is topic speedo gear question... in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014925
Posted by JoHnNy SaVaGe (Member # 6424) on
:
How hard is it to swap the speedo gear for when you do a 3.73 swap? I got the new speedo gear and looked up some info on it and it doesn't seem that hard just wanted to check with your guys personal experience doing it.
Posted by JoHnNy SaVaGe (Member # 6424) on
:
any one? I'm sure some one has changed it before come on fellas help me out.
Posted by hockeyguy713 (Member # 5354) on
:
Just follow the speedo cable to the transmission after you jack the car up a little bit. It connects on the drivers side of the transmission. Theres only 1 bolt (maybe 2), pull the assembly out, snap off the c clip put the new gear on and re-insert.
Done.
Posted by JoHnNy SaVaGe (Member # 6424) on
:
Cool thanks Hockey guy! should be a piece of cake then!
Posted by JohnB (Member # 969) on
:
Look on the rear of the tailshaft, nearly directly to the left of the transmission mount. The cable/housing assembly is held in by a 11mm bolt. It pulls straight out. You will need a small flatblade screwdriver to remove the retaining clip. Gear comes straight off. Re-install in reverse order.
Fueled by Ford Mustang Owners
on CaliforniaFords.com