Author
|
Topic: flat-spot when accelerating??
|
SydeWayzSix
¯
Member # 2222
|
posted
My car has been experienceing this problem on and off. Basically, when I am in 1st or 2nd gear and I floor the gas pedal, it sometimes feels like its falls on its face...but then begins to pull hard right after. It only occurs when the RPM's are below 3K. If I am above 3K RPM and then floor the pedal, it seems fine and pulls hard. Someone told me that it could be due to a faulty MAF sensor, but I'm not sure. Any ideas??
-------------------- 1989 Notchback "SF Giants" edition... Goodbye '00 Kawi ZX-6R...you will be missed dearly.
....on with the show! :)
Posts: 1999 | From: Bay Area | Registered: Dec 2002
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
with the key on and engine off, tap into the TPS sensor wires so you can read the voltage on a volt meter and check that the voltage goes from under 1 volt at idle (throttle closed) smoothly up to ~5volts at wide open throttle.
I would clean the MAF sensor also.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
SydeWayzSix
¯
Member # 2222
|
posted
I'll try that. Also, how do I clean the MAF? Do i clean the wires/connector, or the inside of the MAF??
-------------------- 1989 Notchback "SF Giants" edition... Goodbye '00 Kawi ZX-6R...you will be missed dearly.
....on with the show! :)
Posts: 1999 | From: Bay Area | Registered: Dec 2002
| :
|
|
kingmoochr
¯
Member # 5834
|
posted
inside, very carefully, w/ maf cleaner, NOTHING ELSE
Posts: 881 | Registered: Jul 2005
| :
|
|
93Cobra50
¯
Member # 4602
|
posted
I believe a light spray of brake cleaner on the element should clean it. I had the same problem, but I changed the whole unit
-------------------- 93 Cobra #915, Wont finish itself 95 GT Vert- For Sale 2004 Dodge Ram 3500 Diesel 4x4- Trade for 03 Cobra? 70 ElCamino PROJECT!
Posts: 269 | From: Santa Rosa CA | Registered: Jun 2004
| :
|
|