|
Author
|
Topic: performer heads 2.02 valves ???'s
|
aaskia
¯
Member # 5491
|
posted
 
 
I have a set up performer heads with 2.02 valves, with a e303 cam, and 1.7rr's. I am running the stock pistons. Is this going to cause any piston to valve clearance issues? Thanks.
--------------------
1990 Mustang Lx 5.0 ex-chp
Tfs track heat intake, F303 cam, Afr 165, Full MM suspension, single turbo kit, autopower roll cage.
Posts: 236 | Registered: Mar 2005
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
Im running AFR185's w/1;7 rr's and an e-cam and have no problems.
--------------------
"Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
robs1280
¯
Member # 3295
|
posted
I just installed the same heads and I have the set up, no clearance problems here- Oh I do have the 1.6 roller rockers though.....
Posts: 87 | From: Redwood city | Registered: Sep 2003
| :
|
|
Eagle347
¯
Member # 6205
|
posted
Start it up and find out! It wont hurt anything that bad.
No seriously I would check p2v clearance just to be safe.
--------------------
1995 Mustang GTS 1 of 1002 deep forest green GTS's made. Bone stock.
1990 Coupe 347 NX E85 Nitrous kit
Posts: 712 | From: Dayton, OH | Registered: Nov 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
You are going to need to check piston to valve clearance to be sure.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
