This is topic How to set idle on 91 fox... in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=014154
Posted by gercolla1 (Member # 3068) on
:
I am trying to set the idle at the TB. How open should the butterfly be before I attempt to adjust the tps? Or, am I going at this all wrong and totally overlooking something? What do I have to do?
Posted by two-gun kid (Member # 5891) on
:
there should be a screw under the tb that you adjust.
Posted by hockeyguy713 (Member # 5354) on
:
http://www.corral.net/tech/maintenance/idlereset.html
No worries
Posted by TrickRacer50 (Member # 6345) on
:
quote:
Originally posted by hockeyguy713:
http://www.corral.net/tech/maintenance/idlereset.html
No worries
Good link, except in step #5 it says to:
Turn off engine and reconnect the air bypass solenoid *Optional -- set TPS to 0.90 - 0.95 volts (Do not exceed 1.0 volts MAKE SURE!) Use a digital volt meter!
The optional part is NOT optional. YOU MUST reset your TPS setting.
The rest is correct
Fueled by Ford Mustang Owners
on CaliforniaFords.com