|
Author
|
Topic: How to set idle on 91 fox...
|
gercolla1
¯
Member # 3068
|
posted
 
 
I am trying to set the idle at the TB. How open should the butterfly be before I attempt to adjust the tps? Or, am I going at this all wrong and totally overlooking something? What do I have to do? ![[burnout]](graemlins/burnout.gif)
--------------------
Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
there should be a screw under the tb that you adjust.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
|
|
TrickRacer50
¯
Member # 6345
|
posted
quote:
Originally posted by hockeyguy713:
http://www.corral.net/tech/maintenance/idlereset.html
No worries ![[Wink]](wink.gif)
Good link, except in step #5 it says to:
Turn off engine and reconnect the air bypass solenoid *Optional -- set TPS to 0.90 - 0.95 volts (Do not exceed 1.0 volts MAKE SURE!) Use a digital volt meter!
The optional part is NOT optional. YOU MUST reset your TPS setting.
The rest is correct
Posts: 78 | From: NorCal | Registered: Dec 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
