|
Author
|
Topic: MM&FF BBK SSI Test
|
Curt
¯
Member # 6254
|
posted
 
 
So im sure you all read the article about the SSI vs. the Cobra manifold, does anybody know if they ever did one like that that was Trick Flow vs. Cobra? Trying to decide between the two
--------------------
'90 GT
'94 Toyota 4wd "It have problem"
'56 F100 5.8 AFR185's Vortech SC S-trim
Posts: 866 | From: Monterey/Rocklin | Registered: Nov 2005
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
i know they did 2 sets of test of commonly used intake on a stock 302 then the following issue that used the same intakes on a stroker, let me see if i can find the issues.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
Eagle347
¯
Member # 6205
|
posted
I would not buy either. I have heard notning but bad things about the BBK, and the Cobra was a good intake in its time but now there are many others out that are better, and they do not cost much more. I would look into Trickflow and Edelbrock intakes.
--------------------
1995 Mustang GTS 1 of 1002 deep forest green GTS's made. Bone stock.
1990 Coupe 347 NX E85 Nitrous kit
Posts: 712 | From: Dayton, OH | Registered: Nov 2005
| :
|
|
89 FAKE SNAKE
¯
Member # 4531
|
posted
trick flow ![[patriot]](graemlins/patriot.gif)
--------------------
90 COUPE
01 R1 (stock)
04 XR-50(stroked)
06 TT-R50E
SRA & PWA member
Posts: 3075 | From: san jose | Registered: May 2004
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
quote:
Originally posted by 89 FAKE SNAKE:
trick flow
+1 even looks cooler with matching valve covers ![[Wink]](wink.gif)
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
|
|
92stangLX
¯
Member # 3252
|
posted
It would be great if someone did an intake manifold shootout with *all* of the EFI Street intakes.
Has anyone seen any articles like this?
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
Eagle347
¯
Member # 6205
|
posted
quote:
Originally posted by 92stangLX:
It would be great if someone did an intake manifold shootout with *all* of the EFI Street intakes.
Has anyone seen any articles like this?
5.0 Mag did one a while back. They tested almost every intake. They used a 347 on an engine dyno. The Edelbrock Performer RPM 2 had the best results. I dont know why they never test the Victor 5.0 intake though because it is better than the RPM 2.
--------------------
1995 Mustang GTS 1 of 1002 deep forest green GTS's made. Bone stock.
1990 Coupe 347 NX E85 Nitrous kit
Posts: 712 | From: Dayton, OH | Registered: Nov 2005
| :
|
|
Curt
¯
Member # 6254
|
posted
Yeah I was leaning towards the TF since I plan on getting their heads, and the BBK looks too weird, I was just hoping it might be better
Posts: 866 | From: Monterey/Rocklin | Registered: Nov 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
